IATF

10Gbps Automotive-Compliant Crossbar Switch from Diodes Incorporated Simplifies In-Vehicle USB-C Connectivity

Retrieved on: 
星期四, 五月 2, 2024

Diodes Incorporated (Diodes) (Nasdaq: DIOD) brings extra convenience and performance to state-of-the-art in-car connectivity with the introduction of its 10Gbps automotive-compliant* crossbar switch.

Key Points: 
  • Diodes Incorporated (Diodes) (Nasdaq: DIOD) brings extra convenience and performance to state-of-the-art in-car connectivity with the introduction of its 10Gbps automotive-compliant* crossbar switch.
  • Designed for routing USB 3.2 and DisplayPort™ 2.1 signals through a USB Type-C® connector, Diodes’ new switch, the PI3USB31532Q , ensures high signal integrity and saves power compared to a conventional crossbar multiplexer and ReDriver™.
  • This crossbar switch is targeted for use in rear-seat entertainment systems and smart cockpits with their large, high-definition displays.
  • The PI3USB31532Q supports three configuration modes with USB Type-C compliance, providing a range of options for designers.

Automotive-Compliant Video Switch from Diodes Incorporated Cuts Bill of Materials for Leading Interface Standards

Retrieved on: 
星期二, 四月 30, 2024

Diodes Incorporated (Diodes) (Nasdaq: DIOD) has introduced the PI3WVR14412Q , an automotive-compliant* 20Gbps 1:2 video switch for in-cabin infotainment and advanced driver assistance systems (ADAS) applications.

Key Points: 
  • Diodes Incorporated (Diodes) (Nasdaq: DIOD) has introduced the PI3WVR14412Q , an automotive-compliant* 20Gbps 1:2 video switch for in-cabin infotainment and advanced driver assistance systems (ADAS) applications.
  • The switch has four high-speed lanes with a 10GHz bandwidth to handle DisplayPort™ 2.1, HDMI™ 2.1, MIPI® DPHY/CPHY, USB 3.2, and LVDS connections.
  • In addition, there are switches for hot-plug detect (HPD), HDMI display data channel (DDC), and DisplayPort auxiliary (AUX) signals.
  • The wide ambient operating-temperature range, from -40°C to 105°C, permits deployment in challenging environments or locations exposed to direct sunlight.

Topcon Announces Plans for New State-Of-The-Art Manufacturing Facility in Germany

Retrieved on: 
星期四, 四月 25, 2024

Topcon Positioning Systems has announced a new manufacturing facility will be built in Geisenheim, Germany, near Frankfurt, for the company’s Topcon Electronics operation.

Key Points: 
  • Topcon Positioning Systems has announced a new manufacturing facility will be built in Geisenheim, Germany, near Frankfurt, for the company’s Topcon Electronics operation.
  • View the full release here: https://www.businesswire.com/news/home/20240425835036/en/
    The new state-of-the-art manufacturing facility in Germany will be built with a focus on sustainability.
  • (Graphic: Business Wire)
    The new facility represents a substantial investment by Topcon, signaling the company’s dedication to expanding manufacturing capabilities and strengthening its presence in Europe.
  • The investment underscores our long-term vision for growth and success, reflecting the Topcon values of innovation, quality, and sustainability.”
    For more information about Topcon, visit www.topconpositioning.com .

KYOCERA AVX Announces New Additions to MIL-PRF-39006 QPL

Retrieved on: 
星期三, 四月 24, 2024

As a result, the revision of the Qualified Parts List (QPL) 39006 indicates failure rate levels M and P for these products.

Key Points: 
  • As a result, the revision of the Qualified Parts List (QPL) 39006 indicates failure rate levels M and P for these products.
  • TWA M39006 Series capacitors also exhibit low DC leakage (5–12µA at +25°C and 20–50µA at +85°C and +125°C) and low ESR (0.5–0.9Ω max.
  • "Qualified parts are critical components of high-reliability systems, so we're proud of our latest additions to the MIL-PRF-39006 QPL.
  • For more information about KYOCERA AVX's TWA M39006 Series axial-leaded, hermetically sealed wet tantalum capacitors, including the product datasheet, which will continue to be updated as qualification expands, please visit https://www.kyocera-avx.com/products/tantalum/wet-tantalum/military-dscc... .

Vishay Intertechnology’s EFI Warwick Factory Certified to IATF 16949:2016 for IGBR Product Family

Retrieved on: 
星期一, 三月 25, 2024

Based on ISO 9001:2015 — with additional automotive customer-specific requirements — IATF 16949:2016 is the global technical specification and quality management standard for the automotive industry.

Key Points: 
  • Based on ISO 9001:2015 — with additional automotive customer-specific requirements — IATF 16949:2016 is the global technical specification and quality management standard for the automotive industry.
  • With this certification, the quality management system at the EFI Warwick factory is now certified to ISO 9001:2015 for all products, and IATF 16949:2016 for IGBR resistors.
  • In addition, its environmental management system is certified to ISO 14001:2015 and ISO 45001:2018.
  • Serving customers worldwide, Vishay is The DNA of tech.® Vishay Intertechnology, Inc. is a Fortune 1,000 Company listed on the NYSE (VSH).

Global and China Automotive RISC-V Chip Industry Research Report 2024: Customized Chips May Become the Future Trend, and RISC-V will Challenge ARM

Retrieved on: 
星期五, 三月 15, 2024

DUBLIN, March 14, 2024 /PRNewswire/ -- The "Automotive RISC-V Chip Industry Research Report, 2024" report has been added to ResearchAndMarkets.com's offering.

Key Points: 
  • DUBLIN, March 14, 2024 /PRNewswire/ -- The "Automotive RISC-V Chip Industry Research Report, 2024" report has been added to ResearchAndMarkets.com's offering.
  • In contrast, ARM and X86 are not only complicated in instruction set development, but also difficult to obtain authorization to modify instruction sets.
  • In terms of customization, it enables designers to create thousands of potential customized processors, thus speeding up the time to market.
  • In the past, automotive chips were mainly based on ARM or private architectures of some European chip companies.

SBA Veterans Small Business Advisory Committees to Host Public Meetings on March 6-7

Retrieved on: 
星期四, 二月 29, 2024

WASHINGTON, Feb. 29, 2024 (GLOBE NEWSWIRE) -- Today, the U.S. Small Business Administration (SBA) announced the next set of meetings of the SBA Interagency Task Force (IATF) on Veterans Small Business Development and the SBA Advisory Committee on Veterans Business Affairs (ACVBA) will be held on March 6-7, 2024.

Key Points: 
  • WASHINGTON, Feb. 29, 2024 (GLOBE NEWSWIRE) -- Today, the U.S. Small Business Administration (SBA) announced the next set of meetings of the SBA Interagency Task Force (IATF) on Veterans Small Business Development and the SBA Advisory Committee on Veterans Business Affairs (ACVBA) will be held on March 6-7, 2024.
  • “Veterans’ unique skills and entrepreneurial drive play an important role in our economy,” said Dilawar Syed, Deputy Administrator of the SBA .
  • Public comments and questions are strongly encouraged to be submitted in advance via email by March 4 to [email protected] .
  • Minutes for both meetings will be available at www.sba.gov/ovbd under the "Federal Advisory Committees" section.

Xometry Reports Fourth Quarter and Full Year 2023 Results

Retrieved on: 
星期四, 二月 29, 2024

NORTH BETHESDA, Md., Feb. 29, 2024 (GLOBE NEWSWIRE) --  Xometry, Inc. (NASDAQ:XMTR), the global AI-powered marketplace connecting enterprise buyers with suppliers of manufacturing services, today reported financial results for the fourth quarter and full year ended December 31, 2023.

Key Points: 
  • NORTH BETHESDA, Md., Feb. 29, 2024 (GLOBE NEWSWIRE) --  Xometry, Inc. (NASDAQ:XMTR), the global AI-powered marketplace connecting enterprise buyers with suppliers of manufacturing services, today reported financial results for the fourth quarter and full year ended December 31, 2023.
  • “In Q4 2023, we delivered record financial results including our highest revenue and gross profit in Xometry history,“ said Randy Altschuler, Xometry’s CEO.
  • Marketplace revenue for the fourth quarter of 2023 was $112 million, an increase of 42% year-over-year.
  • Total gross profit for the fourth quarter 2023 was $49.1 million, an increase of 39% year-over-year.

Automotive-Compliant, Three-Channel, Linear LED Driver from Diodes Incorporated Provides Independent Controls for Brightness and Color

Retrieved on: 
星期三, 三月 6, 2024

Diodes Incorporated (Diodes) (Nasdaq: DIOD) today releases a new automotive-compliant* linear LED driver that enables users to independently control the brightness and color of its three channels.

Key Points: 
  • Diodes Incorporated (Diodes) (Nasdaq: DIOD) today releases a new automotive-compliant* linear LED driver that enables users to independently control the brightness and color of its three channels.
  • Human-centric automotive design is driving the demand for multi-channel LED drivers, which allow vehicle occupants to easily change interior lighting colors to match their mood.
  • By simultaneously enabling animated turning-indicator signals and exterior grill lighting for different road conditions, these drivers help increase safety levels.
  • The AL1783Q driver has LED current settings by an external REF pin, independent dimming controls for each channel, and pulse width modulation (PWM) to perform LED dimming.

GWM-FTXT made a grand appearance at the 2024 Fuel Cell Expo (FC EXPO) in Japan, accelerating its expansion into the global market.

Retrieved on: 
星期四, 二月 29, 2024

TOKYO, Feb. 29, 2024 /PRNewswire/ -- On February 28, 2024, the Fuel Cell Expo (FC EXPO) commenced in Tokyo, Japan, standing as one of the world's largest showcases for hydrogen and fuel cell technologies.

Key Points: 
  • TOKYO, Feb. 29, 2024 /PRNewswire/ -- On February 28, 2024, the Fuel Cell Expo (FC EXPO) commenced in Tokyo, Japan, standing as one of the world's largest showcases for hydrogen and fuel cell technologies.
  • As GWM-FTXT is making efforts to accelerate global market expansion, strategic collaborations have been signed with companies and institutions in several countries including Brazil, Canada, and Italy.
  • Together, they aim to collectively explore third-party international markets, leveraging the accumulated application experience in the Chinese market to gradually extend outreach to global markets.
  • This concerted effort seeks to propel pivotal technological innovations and diverse applications in the global hydrogen energy industry, catalyzing the transition toward green energy worldwide.