holE

Surge Copper Intersects 830 metres of 0.38% CuEq and 378 metres of 0.40% CuEq at West Seel

Monday, May 10, 2021 - 10:00am

Neither hole encountered significant mineralization and each help define the limit of mineralization in those areas.\nFigure 2.

Key Points: 
  • Neither hole encountered significant mineralization and each help define the limit of mineralization in those areas.\nFigure 2.
  • West Seel Cross Section C-C\' showing results for holes S21-228, 231, 233, and 239.
  • West Seel long section B-B\' showing results for holes S20-219, 220, 224, and 226, and S21-240.
  • During the program 20,028 metres was drilled in 27 holes and all holes have been logged, sampled, and submitted for assay.

Surge Copper Intersects 830 metres of 0.38% CuEq and 378 metres of 0.40% CuEq at West Seel

Monday, May 10, 2021 - 10:00am

Neither hole encountered significant mineralization and each help define the limit of mineralization in those areas.\nFigure 2.

Key Points: 
  • Neither hole encountered significant mineralization and each help define the limit of mineralization in those areas.\nFigure 2.
  • West Seel Cross Section C-C\' showing results for holes S21-228, 231, 233, and 239.
  • West Seel long section B-B\' showing results for holes S20-219, 220, 224, and 226, and S21-240.
  • During the program 20,028 metres was drilled in 27 holes and all holes have been logged, sampled, and submitted for assay.

Northstar Intersects Near-Surface High-Grade Gold (1,010 g/t Au over 0.5m and 193 g/t Au over 0.6m) at Miller Gold Property

Tuesday, May 4, 2021 - 1:30pm

Vein 2 was encountered in drill hole MG21-56 between approximately 13m and 24m depth (9 metres true width) with abundant quartz stringers and pyrite.

Key Points: 
  • Vein 2 was encountered in drill hole MG21-56 between approximately 13m and 24m depth (9 metres true width) with abundant quartz stringers and pyrite.
  • Vein 3 was intercepted between approximately 57m to 80m depth (18 metres true width) in drill hole MG21-56.
  • Metallic screening will be performed on 16 samples from holes MG21-55 and MG21-56 associated with core intervals hosting coarse visible gold or gold tellurides.
  • which may cause actual results, performance or achievements of Northstar Gold Corp to be materially different from the results, performance or expectation implied by these forward-looking statements.

Cabral Gold Drills 3m @ 13.2 g/t gold at Hamilton Novo, 300m North of MG Gold Deposit, Cuiú Cuiú District, Brazil

Thursday, April 29, 2021 - 1:30pm

Hole RC-63 was drilled 35m SW of the previous drill hole and returned 3m @ 13.2 g/t gold including 1m @ 36.7 g/t gold.

Key Points: 
  • Hole RC-63 was drilled 35m SW of the previous drill hole and returned 3m @ 13.2 g/t gold including 1m @ 36.7 g/t gold.
  • The Company has a 100% interest in the Cui\xc3\xba Cui\xc3\xba gold district located in the Tapaj\xc3\xb3s Region, within the state of Par\xc3\xa1 in northern Brazil.
  • This news release contains forward-looking statements and assumptions pertaining to the following: strategic plans and future operations, and results of exploration.
  • Drill holes results are quoted as down-hole length weighted intersections.\nTo view the source version of this press release, please visit https://www.newsfilecorp.com/release/82265\n'

Second Update on Sanatana's Drill Program at Gold Rush Project, Timmins, Ontario

Thursday, April 29, 2021 - 1:30pm

(TSXV: STA) ("Sanatana" or the "Company") has completed nine holes (1,075 m) on the North Shaft prospect situated on its 2,353 hectare Gold Rush project, located 25km west of the Timmins.

Key Points: 
  • (TSXV: STA) ("Sanatana" or the "Company") has completed nine holes (1,075 m) on the North Shaft prospect situated on its 2,353 hectare Gold Rush project, located 25km west of the Timmins.
  • The first hole targeted 50m below the 6.35 g/t sample which occurs in a 4m zone of above >1g/t channel samples.
  • For the final hole the drill returned to the original middle section to target the main shear at greater depth.
  • The laboratory reports to expect a two- to three-week turnaround.\nTo view an enhanced version of this graphic, please visit:\nTable 1: Location of the Drill Holes and Their Orientation.\n'

Aurelius Minerals Drills Highest Grade Interval to Date at Aureus East Gold Project - 2 Metres at 132.4 g/t Gold, Including 1m at 264 g/t Gold and 0.5m at 21 g/t Gold Within Existing Workings

Tuesday, April 6, 2021 - 11:00am

Hole AE-20-007 is our most successful hole to date, but notably, all of our Phase 1 drill holes, to date, have intersected gold mineralization.

Key Points: 
  • Hole AE-20-007 is our most successful hole to date, but notably, all of our Phase 1 drill holes, to date, have intersected gold mineralization.
  • That's a tremendous achievement considering what limited information we started with, and doing it all in the middle of a travel restricting pandemic.
  • All the gold zones at Aureus East are stacked, folded, and dipping to the east.
  • Figure 1: Aureus East longitudinal section showing underground development, drill locations and trend of the gold horizons.

Maple Gold Intersects High-Grade Gold at 531 Zone and Provides Exploration Update for the Douay Project

Monday, March 29, 2021 - 1:30pm

Located in Quebec, Canada, the project is held by a 50/50 Joint Venture (the "JV") between Maple Gold and Agnico Eagle Mines Limited.

Key Points: 
  • Located in Quebec, Canada, the project is held by a 50/50 Joint Venture (the "JV") between Maple Gold and Agnico Eagle Mines Limited.
  • A highlight was hole DO-20-288 which was drilled at the 531 Zone and encountered multiple higher-grade intercepts.
  • Such interflow horizons represent important targets for gold and/or base metal mineralization at Douay as well as at other significant gold deposits in the Abitibi Belt," concluded Mr. Speidel.
  • In addition to the 531 Zone hole results, results were received for three Porphyry Zone holes and a Main Zone step-out hole (see Table 1 for full results).

Wallbridge Extends Fenelon Mineralization by 400 metres to Depth with 17.23 g/t Au over 4.00 metres in Initial Deep Exploration Hole

Thursday, March 25, 2021 - 10:30am

This was our first ever deep drill hole testing the mineralization at depths of between 1.5-1.8 km below surface, 400 to 700 metres deeper than any previous hole on the Property.

Key Points: 
  • This was our first ever deep drill hole testing the mineralization at depths of between 1.5-1.8 km below surface, 400 to 700 metres deeper than any previous hole on the Property.
  • We are very encouraged by these results, stated Attila Pntek, Vice President Exploration of Wallbridge.
  • Drill hole FA-20-120A was designed to test the Fenelon Gold System at a depth of between 1.5 and 1.8 kilometres, over 500 metres below the deepest extent of past drilling.
  • Assay results as follows:
    17.23 g/t Au over 4.00 metres, including
    65.08 g/t Au over 1.00 metres; and
    8.70 g/t Au over 0.70 metres, and
    5.76 g/t Au over 1.00 metres (see Figs.

Sun Summit Provides Exploration Update; Visible Gold Identified in Numerous Drill Holes

Tuesday, March 23, 2021 - 12:05pm

Since mobilization of crews, Sun Summit has completed 10 drill holes for over 4,000 metres focused on investigating zones of high-grade and bulk-tonnage style gold mineralization.

Key Points: 
  • Since mobilization of crews, Sun Summit has completed 10 drill holes for over 4,000 metres focused on investigating zones of high-grade and bulk-tonnage style gold mineralization.
  • Five out of 10 drill holes intersected zones of visible gold mineralization in a new and highly-prospective area between the Horseshoe and Trench zones.
  • The presence of sub-millimetre to millimetre-scale visible gold in numerous drill holes covering a distance of at least 300 metres east-west, demonstrates the high-grade gold potential of the structurally complex hydrothermal system at Buck.
  • The results suggest that metallic screen methods should be performed on drill core samples containing visible gold.

Pancon Intersects 181.6 Meters of 1.24 g/t Gold in Maiden Diamond Drill Program at Former Brewer Gold Mine

Tuesday, March 2, 2021 - 11:30am

Partial Results from 3 Holes Confirm Significant Continuity of Gold Mineralization Below Former Mine

Key Points: 
  • MPC is doing sample preparation for all holes, and for Holes 4 - 7, MPC is doing all gold assays.
  • For Holes 1 - 3, ALS is doing all gold assays and multielement geochemistry, and for Holes 4 - 7 ALS is only doing multielement geochemistry.
  • In Phase 1, Pancon drilled a total 2,692 meters from seven diamond drill holes and two sonic drill holes (see Figure 2, and more details on all drill holes see January 28, 2021 news release ).
  • In January 2020, Pancon won the exclusive right to explore the former Brewer Gold Mine property.