OIP

Draft guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and chronic obstructive pulmonary disease (COPD)

Retrieved on: 
Thursday, April 18, 2024

21

Key Points: 
    • 21

      Guideline on the requirements for demonstrating
      therapeutic equivalence between orally inhaled products
      (OIP) for asthma and chronic obstructive pulmonary
      disease (COPD)

      22

      Table of contents

      23

      Executive summary ..................................................................................... 4

      24

      1.

    • Primary PK parameters to be analysed and acceptance criteria .............................. 14

      43

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      51

      6.4.

    • Definitions ........................................................................................... 18

      56

      List of Abbreviations.................................................................................. 20

      57

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      58

      Executive summary

      59

      This guideline is the 2nd revision of the CHMP Guideline formerly called ?Guideline on the requirements

      60

      for clinical documentation for orally inhaled products (OIP) including the requirements for

      61

      demonstration of therapeutic equivalence between two inhaled products for use in the treatment of

      62

      asthma and chronic obstructive pulmonary disease (COPD) in adults and for use in the treatment of

      63

      asthma in children and adolescents?.

    • It addresses the requirements for demonstration of therapeutic

      64

      equivalence (TE) between orally inhaled products containing the same active moiety(ies).

    • It is generally not recommended to aim at demonstrating TE using pharmacodynamic

      70

      or clinical endpoints as these are deemed insensitive.

    • This

      83

      guideline is directed particularly at the requirements for demonstrating TE between OIPs containing the

      84

      same active moiety(ies) and used in the management and treatment of patients with asthma and/or

      85

      COPD.

    • 86

      The guideline was first published as points to consider in 2004 and revised for the first time and

      87

      became guideline in 2009.

    • Since then, a number of Q&A documents have been published by Quality

      88

      Working Party (QWP) and former Pharmacokinetic Working Party (PKWP).

    • Scope

      93

      This document provides guidance on the requirements for demonstrating TE between OIPs, including

      94

      both, single active substance products and combination products.

    • Also, in the case that there is a need

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      98

      to confirm similarity to a product for which literature data is available (e.g., well-established use

      99

      applications), the same principles apply.

    • Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      132

      4.

    • Products for nebulisation

      177

      This guideline applies also for products for nebulisation although it is acknowledged that the

      178

      performance of these is highly dependent on the nebuliser used.

    • In vitro criteria for demonstrating TE

      206

      The test and reference products should be compared in order to conclude on TE.

    • Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      211
      212

      2.

    • Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      353

      6.2.

    • Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      392

      6.3.

    • If the
      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      432

      different strengths of the test and the reference product are not shown to be proportional in vitro, in

      433

      vivo equivalence should be demonstrated with a bracketing approach.

    • Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      471

      6.4.

    • Griffin, 1964

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      553

      which both reference product-na?ve and experienced users should be included.

    • 568

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      569

      10.

    • Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      Product strength

      Product strength may be either the delivered
      dose or the metered dose.

    • 570

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      571

      List of Abbreviations
      APSD

      Aerodynamic Particle Size Distribution

      AUC

      Area Under the Curve

      CHMP

      Committee for Medicinal Products for Human
      Use

      CI

      Confidence Interval

      Cmax

      Peak concentration

      COPD

      Chronic Obstructive Pulmonary Disease

      DPI

      Dry Powder Inhaler

      FPD

      Fine Particle Dose

      GI

      Gastrointestinal

      ICH

      International Conference on Harmonisation

      IVIVC

      In vitro in vivo correlation

      MDI

      Metered Dose Inhaler

      OIP

      Orally Inhaled Product

      PD

      Pharmacodynamic

      PK

      Pharmacokinetic

      pMDI

      Pressurised Metered Dose Inhaler

      QWP

      Quality Working Party

      SmPC

      Summary of Product Characteristics

      TE

      Therapeutic equivalence

      tmax

      Time to peak concentration

      572

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

Draft guideline on the pharmaceutical quality of inhalation and nasal medicinal products

Retrieved on: 
Thursday, April 18, 2024

17

Key Points: 
    • 17

      Guideline on the pharmaceutical quality of inhalation and
      nasal medicinal products

      18

      Table of contents

      19

      Executive summary ..................................................................................... 3

      20

      1.

    • Lifecycle management ........................................................................................ 28

      49

      Definitions ................................................................................................. 29

      16

      50
      51

      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 2/30

      52

      Executive summary

      53

      This guideline is the first revision of the guideline on pharmaceutical quality of inhalation and nasal

      54

      products (EMEA/CHMP/QWP/49313/2005 Corr).

    • Quality aspects specific to inhalation and nasal medicinal products are discussed, the need for

      66

      safety testing (e.g., for excipients and leachables) is also considered.

    • 69

      Detailed guidance on pharmaceutical development study designs (e.g., priming studies) and the

      70

      analytical procedures primarily used for inhalation and nasal medicinal products (e.g., cascade

      71

      impactor analysis) is not included in this guideline.

    • Scope

      74

      The guideline addresses requirements "on the quality of inhalation and nasal medicinal products" in

      75

      new marketing authorisation applications, including abridged applications.

    • Liquid inhalation anaesthetics and nasal ointments, creams and gels are

      88

      excluded, however the general principles described in this guideline should be considered.

    • 118

      Different polymorphic forms including any amorphous content could affect the quality or performance

      119

      of the finished medicinal product.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 4/30

      132

      The primary packaging, type of inhaler and, if necessary, the secondary packaging or other

      133

      components required for reasons of stability should be described.

    • Pharmaceutical
      development study

      (a) Physical
      characterisation
      (b) Minimum fill
      justification
      (c) Extractable
      volume

      Pressurised

      Dry powder

      Preparations for

      Non-

      metered-

      inhalers (DPI)

      nebulisation

      pressurised

      dose

      metered-

      Device-

      Pre-

      Single-

      Multi-

      (pMDI)

      metered

      metered

      dose

      dose

      inhalers

      Yesa

      Yes

      Yes

      Yesa

      Yesa

      Yesa

      Yes

      Yes

      Yes

      Yes

      Yes

      Yes

      No

      No

      No

      Yes

      No

      No

      inhalers

      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      dose

      Page 5/30

      Table 4.2.1.

    • The last doses delivered by

      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 7/30

      179

      the inhaler as defined by the label claim, should meet the finished medicinal product specification limits

      180

      for delivered dose and fine particle dose.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 9/30

      263
      264

      4.2.2.8.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 11/30

      345

      Instructions regarding cold temperature use should be provided in the product information.

    • Finished medicinal
      product

      Pressurised

      Dry powder inhalers

      Preparations for

      metered-

      (DPI)

      nebulisation

      dose

      Nonpressurised
      metered-dose

      Device-

      Pre-

      Single-

      Multi-

      (pMDI)

      metered

      metered

      dose

      dose

      inhalers

      (a) Description

      Yes

      Yes

      Yes

      Yes

      Yes

      Yes

      (b) Assay

      Yes

      Yes

      Yes

      Yes

      Yes

      Yes

      (c) Moisture content

      Yes

      Yes

      Yes

      No

      No

      No

      Yes

      Yes

      Yes

      No

      No

      Yes

      Yes

      Yes

      Yes

      No

      No

      Yes

      specification test

      (d) Mean delivered
      dose
      (e) Uniformity of
      delivered dose

      inhalers

      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 15/30

      Table 4.2.2.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 16/30

      510

      4.2.5.4.

    • The proposed specification limits should take into account the shelf-life performance of the
      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 17/30

      552

      medicinal product.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 18/30

      586

      All medical devices, including inhalers and nasal devices, have to fulfil the general requirements as

      587

      outlined in the Medical Device Regulation (EU) 2017/745.

    • Stability (CTD 3.2.P.8)

      598

      All inhalation medicinal products should be tested on stability against the stability indicating tests

      599

      included in the finished medicinal product specification.

    • Quality data requirements as

      619

      described in this guideline should be met, supplemented by appropriate comparative quality and

      620

      clinical data with respect to the chosen reference medicinal product.

    • 621

      For inhalation medicinal products comparative in vitro data between the abridged application medicinal

      622

      product and the reference medicinal product must be provided.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 20/30

      670

      Nature and contents of container: The type of the device and its components should be listed.

    • Nasal medicinal products

      695

      Inhalation and nasal medicinal products have many similarities and therefore, most of the

      696

      requirements specified for inhalation medicinal products in section 4 also apply for nasal medicinal

      697

      products.

    • One difference between inhalation and nasal medicinal products is the desired

      698

      particle/droplet size of the finished medicinal product.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 21/30

      704

      5.2.

    • Nasal liquids
      Pharmaceutical
      development
      study

      Pressurised

      Nasal

      metered-

      powders,

      dose nasal

      device-

      spray

      metered

      NonSingledose
      drops

      Multidose
      drops

      Single-

      pressurised

      dose

      multidose

      spray

      metereddose spray

      (a) Physical
      characterisation
      (b) Minimum fill
      justification
      (d) Extractables /
      leachables

      Yesa

      Yes

      Yesa

      Yesa

      Yesa

      Yesa

      Yes

      Yes

      Yes

      Yes

      Yes

      Yes

      Yes

      No

      Yes

      Yes

      Yes

      Yes

      Yes

      Yes

      No

      No

      Yes

      Yes

      Yes

      Yes

      No

      No

      No

      Yes

      Yes

      Yes

      No

      No

      Yes

      Yes

      (f) Particle /
      droplet size
      distribution
      (g) Uniformity of
      delivered dose
      through container
      life
      (j) Actuator /
      mouthpiece
      deposition

      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 22/30

      Table 5.2.1.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 23/30

      728

      5.2.2.2.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 24/30

      769

      5.2.5.

    • Quality data requirements as described in

      799

      this guideline should be met, supplemented by appropriate comparative quality and clinical data with

      800

      respect to the chosen reference medicinal product.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 27/30

      849

      5.5.

    • 866

      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 28/30

      867

      Definitions
      Activation:

      The act of setting in motion the delivery device.

    • Delivery device:

      The sum of component(s) of the container closure system responsible for
      delivering the active substance to the respiratory tract (inhalation medicinal
      product) or the nasal and/or pharyngeal region (nasal medicinal product).

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 29/30

      Label claim:

      The amount of active substance (usually on a per actuation basis) declared
      on the label of the medicinal product.

    • Nasal medicinal

      A finished medicinal product (including the delivery device, where

      product:

      applicable) whose intended site of deposition is the nasal and/or pharyngeal
      region.

    • 868
      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 30/30

Draft guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and chronic obstructive pulmonary disease (COPD)

Retrieved on: 
Thursday, April 18, 2024

21

Key Points: 
    • 21

      Guideline on the requirements for demonstrating
      therapeutic equivalence between orally inhaled products
      (OIP) for asthma and chronic obstructive pulmonary
      disease (COPD)

      22

      Table of contents

      23

      Executive summary ..................................................................................... 4

      24

      1.

    • Primary PK parameters to be analysed and acceptance criteria .............................. 14

      43

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      51

      6.4.

    • Definitions ........................................................................................... 18

      56

      List of Abbreviations.................................................................................. 20

      57

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      58

      Executive summary

      59

      This guideline is the 2nd revision of the CHMP Guideline formerly called ?Guideline on the requirements

      60

      for clinical documentation for orally inhaled products (OIP) including the requirements for

      61

      demonstration of therapeutic equivalence between two inhaled products for use in the treatment of

      62

      asthma and chronic obstructive pulmonary disease (COPD) in adults and for use in the treatment of

      63

      asthma in children and adolescents?.

    • It addresses the requirements for demonstration of therapeutic

      64

      equivalence (TE) between orally inhaled products containing the same active moiety(ies).

    • It is generally not recommended to aim at demonstrating TE using pharmacodynamic

      70

      or clinical endpoints as these are deemed insensitive.

    • This

      83

      guideline is directed particularly at the requirements for demonstrating TE between OIPs containing the

      84

      same active moiety(ies) and used in the management and treatment of patients with asthma and/or

      85

      COPD.

    • 86

      The guideline was first published as points to consider in 2004 and revised for the first time and

      87

      became guideline in 2009.

    • Since then, a number of Q&A documents have been published by Quality

      88

      Working Party (QWP) and former Pharmacokinetic Working Party (PKWP).

    • Scope

      93

      This document provides guidance on the requirements for demonstrating TE between OIPs, including

      94

      both, single active substance products and combination products.

    • Also, in the case that there is a need

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      98

      to confirm similarity to a product for which literature data is available (e.g., well-established use

      99

      applications), the same principles apply.

    • Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      132

      4.

    • Products for nebulisation

      177

      This guideline applies also for products for nebulisation although it is acknowledged that the

      178

      performance of these is highly dependent on the nebuliser used.

    • In vitro criteria for demonstrating TE

      206

      The test and reference products should be compared in order to conclude on TE.

    • Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      211
      212

      2.

    • Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      353

      6.2.

    • Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      392

      6.3.

    • If the
      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      432

      different strengths of the test and the reference product are not shown to be proportional in vitro, in

      433

      vivo equivalence should be demonstrated with a bracketing approach.

    • Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      471

      6.4.

    • Griffin, 1964

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      553

      which both reference product-na?ve and experienced users should be included.

    • 568

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      569

      10.

    • Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      Product strength

      Product strength may be either the delivered
      dose or the metered dose.

    • 570

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      571

      List of Abbreviations
      APSD

      Aerodynamic Particle Size Distribution

      AUC

      Area Under the Curve

      CHMP

      Committee for Medicinal Products for Human
      Use

      CI

      Confidence Interval

      Cmax

      Peak concentration

      COPD

      Chronic Obstructive Pulmonary Disease

      DPI

      Dry Powder Inhaler

      FPD

      Fine Particle Dose

      GI

      Gastrointestinal

      ICH

      International Conference on Harmonisation

      IVIVC

      In vitro in vivo correlation

      MDI

      Metered Dose Inhaler

      OIP

      Orally Inhaled Product

      PD

      Pharmacodynamic

      PK

      Pharmacokinetic

      pMDI

      Pressurised Metered Dose Inhaler

      QWP

      Quality Working Party

      SmPC

      Summary of Product Characteristics

      TE

      Therapeutic equivalence

      tmax

      Time to peak concentration

      572

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

Draft guideline on the pharmaceutical quality of inhalation and nasal medicinal products

Retrieved on: 
Thursday, April 18, 2024

17

Key Points: 
    • 17

      Guideline on the pharmaceutical quality of inhalation and
      nasal medicinal products

      18

      Table of contents

      19

      Executive summary ..................................................................................... 3

      20

      1.

    • Lifecycle management ........................................................................................ 28

      49

      Definitions ................................................................................................. 29

      16

      50
      51

      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 2/30

      52

      Executive summary

      53

      This guideline is the first revision of the guideline on pharmaceutical quality of inhalation and nasal

      54

      products (EMEA/CHMP/QWP/49313/2005 Corr).

    • Quality aspects specific to inhalation and nasal medicinal products are discussed, the need for

      66

      safety testing (e.g., for excipients and leachables) is also considered.

    • 69

      Detailed guidance on pharmaceutical development study designs (e.g., priming studies) and the

      70

      analytical procedures primarily used for inhalation and nasal medicinal products (e.g., cascade

      71

      impactor analysis) is not included in this guideline.

    • Scope

      74

      The guideline addresses requirements "on the quality of inhalation and nasal medicinal products" in

      75

      new marketing authorisation applications, including abridged applications.

    • Liquid inhalation anaesthetics and nasal ointments, creams and gels are

      88

      excluded, however the general principles described in this guideline should be considered.

    • 118

      Different polymorphic forms including any amorphous content could affect the quality or performance

      119

      of the finished medicinal product.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 4/30

      132

      The primary packaging, type of inhaler and, if necessary, the secondary packaging or other

      133

      components required for reasons of stability should be described.

    • Pharmaceutical
      development study

      (a) Physical
      characterisation
      (b) Minimum fill
      justification
      (c) Extractable
      volume

      Pressurised

      Dry powder

      Preparations for

      Non-

      metered-

      inhalers (DPI)

      nebulisation

      pressurised

      dose

      metered-

      Device-

      Pre-

      Single-

      Multi-

      (pMDI)

      metered

      metered

      dose

      dose

      inhalers

      Yesa

      Yes

      Yes

      Yesa

      Yesa

      Yesa

      Yes

      Yes

      Yes

      Yes

      Yes

      Yes

      No

      No

      No

      Yes

      No

      No

      inhalers

      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      dose

      Page 5/30

      Table 4.2.1.

    • The last doses delivered by

      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 7/30

      179

      the inhaler as defined by the label claim, should meet the finished medicinal product specification limits

      180

      for delivered dose and fine particle dose.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 9/30

      263
      264

      4.2.2.8.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 11/30

      345

      Instructions regarding cold temperature use should be provided in the product information.

    • Finished medicinal
      product

      Pressurised

      Dry powder inhalers

      Preparations for

      metered-

      (DPI)

      nebulisation

      dose

      Nonpressurised
      metered-dose

      Device-

      Pre-

      Single-

      Multi-

      (pMDI)

      metered

      metered

      dose

      dose

      inhalers

      (a) Description

      Yes

      Yes

      Yes

      Yes

      Yes

      Yes

      (b) Assay

      Yes

      Yes

      Yes

      Yes

      Yes

      Yes

      (c) Moisture content

      Yes

      Yes

      Yes

      No

      No

      No

      Yes

      Yes

      Yes

      No

      No

      Yes

      Yes

      Yes

      Yes

      No

      No

      Yes

      specification test

      (d) Mean delivered
      dose
      (e) Uniformity of
      delivered dose

      inhalers

      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 15/30

      Table 4.2.2.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 16/30

      510

      4.2.5.4.

    • The proposed specification limits should take into account the shelf-life performance of the
      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 17/30

      552

      medicinal product.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 18/30

      586

      All medical devices, including inhalers and nasal devices, have to fulfil the general requirements as

      587

      outlined in the Medical Device Regulation (EU) 2017/745.

    • Stability (CTD 3.2.P.8)

      598

      All inhalation medicinal products should be tested on stability against the stability indicating tests

      599

      included in the finished medicinal product specification.

    • Quality data requirements as

      619

      described in this guideline should be met, supplemented by appropriate comparative quality and

      620

      clinical data with respect to the chosen reference medicinal product.

    • 621

      For inhalation medicinal products comparative in vitro data between the abridged application medicinal

      622

      product and the reference medicinal product must be provided.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 20/30

      670

      Nature and contents of container: The type of the device and its components should be listed.

    • Nasal medicinal products

      695

      Inhalation and nasal medicinal products have many similarities and therefore, most of the

      696

      requirements specified for inhalation medicinal products in section 4 also apply for nasal medicinal

      697

      products.

    • One difference between inhalation and nasal medicinal products is the desired

      698

      particle/droplet size of the finished medicinal product.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 21/30

      704

      5.2.

    • Nasal liquids
      Pharmaceutical
      development
      study

      Pressurised

      Nasal

      metered-

      powders,

      dose nasal

      device-

      spray

      metered

      NonSingledose
      drops

      Multidose
      drops

      Single-

      pressurised

      dose

      multidose

      spray

      metereddose spray

      (a) Physical
      characterisation
      (b) Minimum fill
      justification
      (d) Extractables /
      leachables

      Yesa

      Yes

      Yesa

      Yesa

      Yesa

      Yesa

      Yes

      Yes

      Yes

      Yes

      Yes

      Yes

      Yes

      No

      Yes

      Yes

      Yes

      Yes

      Yes

      Yes

      No

      No

      Yes

      Yes

      Yes

      Yes

      No

      No

      No

      Yes

      Yes

      Yes

      No

      No

      Yes

      Yes

      (f) Particle /
      droplet size
      distribution
      (g) Uniformity of
      delivered dose
      through container
      life
      (j) Actuator /
      mouthpiece
      deposition

      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 22/30

      Table 5.2.1.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 23/30

      728

      5.2.2.2.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 24/30

      769

      5.2.5.

    • Quality data requirements as described in

      799

      this guideline should be met, supplemented by appropriate comparative quality and clinical data with

      800

      respect to the chosen reference medicinal product.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 27/30

      849

      5.5.

    • 866

      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 28/30

      867

      Definitions
      Activation:

      The act of setting in motion the delivery device.

    • Delivery device:

      The sum of component(s) of the container closure system responsible for
      delivering the active substance to the respiratory tract (inhalation medicinal
      product) or the nasal and/or pharyngeal region (nasal medicinal product).

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 29/30

      Label claim:

      The amount of active substance (usually on a per actuation basis) declared
      on the label of the medicinal product.

    • Nasal medicinal

      A finished medicinal product (including the delivery device, where

      product:

      applicable) whose intended site of deposition is the nasal and/or pharyngeal
      region.

    • 868
      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 30/30

Alphawave Semi Demonstrates 3nm Silicon-Proven 24Gbps Universal Chiplet ExpressTM (UCIeTM) Subsystem for High-Performance AI Infrastructure

Retrieved on: 
Tuesday, March 12, 2024

This new silicon-proven Universal Chiplet Interconnect Express (UCIeTM) subsystem expands Alphawave Semi’s portfolio and leadership in connectivity silicon.

Key Points: 
  • This new silicon-proven Universal Chiplet Interconnect Express (UCIeTM) subsystem expands Alphawave Semi’s portfolio and leadership in connectivity silicon.
  • It paves the way for a robust, open chiplet ecosystem that accelerates connectivity and compute for high-performance AI systems.
  • An industry-first live demo of Alphawave Semi’s 24Gbps UCIe silicon platform on the TSMC 3nm process was recently unveiled at the Chiplet Summit in Santa Clara, CA.
  • View the full release here: https://www.businesswire.com/news/home/20240311461384/en/
    Alphawave Semi 24Gbps UCIe 3nm silicon platform (Graphic: Business Wire)
    Alphawave Semi’s 3nm UCIe complete PHY + Controller subsystem is capable of 24Gbps data rates, delivering high bandwidth density at extremely low power and low latency.

Synopsys Honored at TSMC 2023 OIP Ecosystem Forum with Multiple Partner of the Year Awards

Retrieved on: 
Thursday, October 26, 2023

SUNNYVALE, Calif., Oct.  26, 2023 /PRNewswire/ -- Synopsys, Inc. (Nasdaq: SNPS) has been selected as a TSMC Open Innovation Platform® (OIP) Partner of the Year, earning five awards spanning digital, analog, multi-die system, radio frequency (RF) design, and interface IP. The long-standing collaboration between the two companies continues to deliver production-proven solutions, including certified design flows, powered by the Synopsys.ai™ full-stack AI-driven EDA suite, that help mutual customers accelerate the development and silicon success of innovative AI, automotive, and high-performance computing designs. Synopsys solutions were featured in an unprecedented number of presentations at the 2023 North America TSMC OIP Ecosystem forum, highlighting strong collaboration with TSMC and partners on proven solutions for TSMC's advanced process and 3DFabric™ technologies. 

Key Points: 
  • Silicon success of Synopsys Interface IP portfolio on TSMC N3E reduces integration risk, accelerates time-to-market, and provides a fast path to TSMC N3P.
  • Synopsys solutions were featured in an unprecedented number of presentations at the 2023 North America TSMC OIP Ecosystem forum, highlighting strong collaboration with TSMC and partners on proven solutions for TSMC's advanced process and 3DFabric™ technologies.
  • "The partner awards recognize the significant contributions made by the TSMC OIP ecosystem partners like Synopsys to advance the next generation of high-performance designs on TSMC's technologies, with massively improved quality of results and time to results."
  • Partner Collaboration: Synopsys, Ansys, and Keysight were recognized for their unprecedented collaboration to develop the RF reference flows for TSMC's leading N16, N6 and N4P processes.

Cadence Wins Four 2023 TSMC OIP Partner of the Year Awards

Retrieved on: 
Thursday, October 19, 2023

Cadence Design Systems, Inc. (Nasdaq: CDNS) today announced that it has won four Open Innovation Platform® (OIP) Partner of the Year awards from TSMC for its EDA and IP design solutions.

Key Points: 
  • Cadence Design Systems, Inc. (Nasdaq: CDNS) today announced that it has won four Open Innovation Platform® (OIP) Partner of the Year awards from TSMC for its EDA and IP design solutions.
  • Cadence was presented with awards for the joint development of the N2 and N3P design infrastructure, 3Dbloxdesign prototyping solution, mmWave design solutions and DSP IP.
  • In addition, Cadence collaborated with TSMC to optimize the Virtuoso platform for the 79GHz mmWave design reference flow on TSMC’s N16 process.
  • DSP IP: Cadence expanded its collaboration with TSMC’s Soft IP9000 team to certify Cadence Tensilica® DSP IP in the TSMC integration flow.

PREA Foundation Funds Girls Who Invest to Increase Representation in the Real Estate Investment Industry

Retrieved on: 
Wednesday, October 18, 2023

PREA’s partnership with GWI is part of the Foundation’s ongoing effort to promote diversity and inclusion within the real estate investment industry.

Key Points: 
  • PREA’s partnership with GWI is part of the Foundation’s ongoing effort to promote diversity and inclusion within the real estate investment industry.
  • “Industry allies like the PREA Foundation are essential to GWI’s core programming and the long term retention of young women and non-binary investors.
  • We are excited to be working hand-in-hand to create a path for GWI Alumni to reach the executive leadership level in the real estate industry.”
    “The PREA Foundation is proud to partner with GWI to increase gender diversity in the commercial real estate industry.
  • By enhancing GWI’s rigorous training programs with real estate industry content, this partnership will help to develop the next generation of real estate finance leaders,” said Dr. Ivan Barron, PREA Foundation Executive Director.

Ansys Receives Four TSMC 2023 OIP Partner of the Year Awards for Joint Development of Leading Multiphysics Technology and Design Solutions

Retrieved on: 
Thursday, October 19, 2023

PITTSBURGH, Oct. 19, 2023 /PRNewswire/ -- Ansys (Nasdaq: ANSS) has been recognized by TSMC as a recipient of four TSMC Open Innovation Platform® (OIP) Partner of the year awards for 2023. The OIP Partner of the Year awards honor TSMC Open Innovation Platform ecosystem partners' pursuit of excellence in next-generation design enablement over the past year. Ansys and other OIP ecosystem partners collaborate with TSMC to effectively promote innovation in the semiconductor industry. 

Key Points: 
  • The OIP Partner of the Year awards honor TSMC Open Innovation Platform ecosystem partners' pursuit of excellence in next-generation design enablement over the past year.
  • Ansys and other OIP ecosystem partners collaborate with TSMC to effectively promote innovation in the semiconductor industry.
  • Both the OIP Partner Collaboration award and the Joint Development of Millimeter-Wave Design Solutions award reflect the two tiers of collaborative effort with OIP partners to jointly develop four reference flows for radio-frequency (RF) design enablement with Ansys RaptorX™ , Ansys Exalto™ , Ansys VeloceRF™ , and Ansys Totem™ across multiple TSMC process technologies.
  • "We congratulate Ansys for winning these four 2023 TSMC OIP Partner of the Year awards," said Dan Kochpatcharin, head of the design infrastructure management division at TSMC.

Silicon Creations Named 2023 TSMC OIP Partner of the Year for Analog / Mixed-Signal IP

Retrieved on: 
Monday, October 16, 2023

Silicon Creations , a leading supplier of high-performance analog and mixed-signal intellectual property (IP), has been recognized by TSMC as the recipient of the 2023 OIP Partner of the Year Award for Analog/Mixed Signal IP.

Key Points: 
  • Silicon Creations , a leading supplier of high-performance analog and mixed-signal intellectual property (IP), has been recognized by TSMC as the recipient of the 2023 OIP Partner of the Year Award for Analog/Mixed Signal IP.
  • The OIP Partner of the Year award honors TSMC Open Innovation Platform® (OIP) ecosystem partners’ pursuit of excellence in next-generation design enablement over the past year.
  • Randy Caplan, Co-Founder of Silicon Creations, expressed the company’s gratitude for being honored with the 2023 Analog Mixed Signal IP Partner of the Year award for the seventh consecutive year.
  • “Congratulations to Silicon Creations, as the winner of the 2023 TSMC OIP Partner of the Year award,” said Dan Kochpatcharin, head of the Design Infrastructure Management Division at TSMC.