Photomask

EQS-News: SUSS MicroTec: 2022 was the most successful year in the Company's history | Further growth and earnings improvement expected for 2023

Retrieved on: 
Saturday, April 15, 2023
Saskatchewan River Sturgeon Management Board, Semiconductor, Shareholder, Lithography, Asia Pacific Transport Consortium, SUSS, Photomask, Research, EBIT, Garching, Silicon carbide, Acquisition, UV, Supervisory board, Motivation, CFO, Growth, SÜSS MicroTec, Annual report, Perpend stone, Lithium, Video game, EUR

In the past fiscal year, SUSS MicroTec achieved an order entry of EUR 446.2 million, exceeding the previous year's figure by 32.4 percent.

Key Points: 
  • In the past fiscal year, SUSS MicroTec achieved an order entry of EUR 446.2 million, exceeding the previous year's figure by 32.4 percent.
  • The Asia/Pacific region was again the most important region for SUSS MicroTec in 2022, with a share of around 70 percent.
  • The order backlog of EUR 346.4 million at December 31, 2022, will ensure high utilization of production capacities in 2023 and to some extent also in 2024.
  • On an absolute basis, the Lithography division made the largest contribution to growth, with sales increasing by EUR 20.6 million to EUR 175.7 million.

EQS-News: SÜSS MicroTec SE: Management confirms targets until 2025 at Capital Markets Day | Further potential for growth and efficiency gains by 2030 | Focus on core semiconductor markets

Retrieved on: 
Thursday, February 2, 2023
UV, Yole, OPEX, Capital market, EUV, SET, DNA Oyj, Financial Oversight and Management Board for Puerto Rico, Total, Running, Society of Vacuum Coaters, Photomask, SÜSS MicroTec, Lithography, Thought, Marketing, Publishing, Growth, Software, SUSS, EBIT, EUR, MEMS, Semiconductor, Security (finance), Renewable energy, Fine chemical, Perpend stone

Garching, Germany, February 2, 2023 – SÜSS MicroTec SE, a leading manufacturer of system and process solutions for the semiconductor industry and related markets, is informing capital markets about its strategic future today at the Capital Markets Day.

Key Points: 
  • Garching, Germany, February 2, 2023 – SÜSS MicroTec SE, a leading manufacturer of system and process solutions for the semiconductor industry and related markets, is informing capital markets about its strategic future today at the Capital Markets Day.
  • The focus will be on the growth prospects until 2030 for the Advanced Backend Solutions and Photomask Equipment business units.
  • In addition to its growth prospects, SUSS MicroTec is also presenting a strategy for improving the efficiency of its operations at the Capital Markets Day.
  • The Capital Markets Day presentations will be available for download at www.suss.com/en/investor-relations/publications shortly after the event.

DGAP-News: SUSS MicroTec: Once Again High Order Intake, as well as Revenue and Earnings Growth, in First Quarter of 2022

Retrieved on: 
Thursday, May 12, 2022
COVID-19, ISIN, MEMS, Frankfurt Stock Exchange, DGAP, Environment, Uncertainty, Earnings growth, Solution, EAT, Projection, Industry, LED, Photomask, Lithography, SUSS, EBIT, SÜSS MicroTec, Private Securities Litigation Reform Act, News, Growth, Video game, Security (finance), Pharmaceutical industry, Cryptocurrency, Perpend stone

SUSS MicroTec: Once Again High Order Intake, as well as Revenue and Earnings Growth, in First Quarter of 2022

Key Points: 
  • SUSS MicroTec: Once Again High Order Intake, as well as Revenue and Earnings Growth, in First Quarter of 2022
    The issuer is solely responsible for the content of this announcement.
  • The Lithography segment, which often generates high order entry, has almost equaled the record figure of the prior year quarter.
  • "We are particularly glad that we have received the first order for our new wafer-to-wafer hybrid bonding solution in the past quarter.
  • With the high order intake, the order backlog also increased further to 249.2 million as of March 31, 2022.

OTI Lumionics and Dai Nippon Printing Collaborate on Cleaning Solution for Cathode Patterning Material for OLED Displays

Retrieved on: 
Monday, May 9, 2022
Dai, Evaporation, Semiconductor, Printing, GLOBE, Â, EVM, Electronics, OTI, Machine learning, DNP, Solution, Photomask, Technology, Empire of Japan, OLED, General manager, Television, Optical film

OTIs CPM materials are applied by customers to solve some of the most challenging problems in manufacturing next-generation displays.

Key Points: 
  • OTIs CPM materials are applied by customers to solve some of the most challenging problems in manufacturing next-generation displays.
  • For these new display applications, EVM requires high quality and high precision in order to accurately deposit CPMTM materials onto the substrate.
  • CPMTM deposition using EVM made with DNP's proprietary microfabrication technology allows panel makers to achieve fine metal patterning with the existing OLED mass-production equipment and process.
  • Since 1876, DNP is the worldwide leader in printing solutions and connects individuals and society, and provides new value.

DGAP-News: SUSS MicroTec: Record Orders in 2021

Retrieved on: 
Friday, April 1, 2022
Company, EUV, COO, Partnership, Lithography, SUSS, ROCE, Annual report, Saskatchewan River Sturgeon Management Board, CEO, Private Securities Litigation Reform Act, ISIN, Member of the Legislative Assembly, SÜSS MicroTec, EBIT, Industry, Frankfurt Stock Exchange, Tax, Projection, Perpend stone, MEMS, Yoy, Solution, SET, LED, Photomask, AGM, Security (finance)

With revenue growth of 4.5% to 263.4 million, SUSS MicroTec has exceeded the record revenue of the previous year ( 252.1 million).

Key Points: 
  • With revenue growth of 4.5% to 263.4 million, SUSS MicroTec has exceeded the record revenue of the previous year ( 252.1 million).
  • As in the previous year, SUSS MicroTec has generated value for our shareholders, with a return on capital employed (ROCE) of 14.0% in 2021 (2020: 12.9%).
  • SUSS MicroTec has been able to reach a number of milestones besides its revenue, profit and order entry growth in 2021.
  • In the Lithography segment, SUSS MicroTec has received new orders for our UV projection scanners, following the successful transfer of their production.

DNP Develops Lead Frame for Miniaturized, Highly Reliable Semiconductor Package QFN(Quad Flat Non-leaded)

Retrieved on: 
Thursday, October 28, 2021
Semiconductor, Automotive Manufacturing, Technology, Manufacturing, Other Manufacturing, Hardware, Dai, JEDEC, Technology, QFN, Industry, Heat, View, Moisture sensitivity level, Communication, Semiconductor, MSL, Photomask, Absorption, Joint Electronics Type Designation System, Multimedia, DNP, Solution, Printing, Adhesive bonding, FY, Printed circuit board

View the full release here: https://www.businesswire.com/news/home/20211027005428/en/

Key Points: 
  • View the full release here: https://www.businesswire.com/news/home/20211027005428/en/
    Newly developed lead frame (Photo: Business Wire)
    By providing this high definition, highly reliable lead frame we aim to expand the use of semiconductor Quad Flat Non-leaded package (QFN) for vehicles.
  • DNP has taken advantage of our microfabrication technology developed over many years to successfully achieve the configuration of lead frame silver plated area of 25um.
  • It has also been possible to maintain high level reliability by improving the adhesion of the mold compound and the lead frame.
  • DNP will propose the newly developed high definition, highly reliable lead frame to post-processing manufacturers and expand this business.

Mycronic receives order for two SLX systems

Retrieved on: 
Tuesday, July 20, 2021
Photomask, Academic disciplines, Engineering, SLX, Reliability engineering, Articles

STOCKHOLM, July 20, 2021 /PRNewswire/ -- Mycronic AB (publ) has received an order for two SLX systems from a new customer in Asia.

Key Points: 
  • STOCKHOLM, July 20, 2021 /PRNewswire/ -- Mycronic AB (publ) has received an order for two SLX systems from a new customer in Asia.
  • The SLX laser mask writer meets rising demand for photomasks for the semiconductor industry and a future need for replacement and modernization.
  • "It is extra gratifying to be entrusted to deliver two SLX systems and in addition to a new customer.
  • The order further underlines thatthe SLX system's performance, productivity and reliability makes it cost effective for customers producing photomasks to the rapidly growingsemiconductor industry," says Charlott Samuelsson, Sr VP Pattern Generators at Mycronic.

Mycronic receives order for two SLX systems

Retrieved on: 
Tuesday, July 20, 2021
Photomask, Academic disciplines, Engineering, SLX, Reliability engineering, Articles

STOCKHOLM, July 20, 2021 /PRNewswire/ -- Mycronic AB (publ) has received an order for two SLX systems from a new customer in Asia.

Key Points: 
  • STOCKHOLM, July 20, 2021 /PRNewswire/ -- Mycronic AB (publ) has received an order for two SLX systems from a new customer in Asia.
  • The SLX laser mask writer meets rising demand for photomasks for the semiconductor industry and a future need for replacement and modernization.
  • "It is extra gratifying to be entrusted to deliver two SLX systems and in addition to a new customer.
  • The order further underlines thatthe SLX system's performance, productivity and reliability makes it cost effective for customers producing photomasks to the rapidly growingsemiconductor industry," says Charlott Samuelsson, Sr VP Pattern Generators at Mycronic.

Mycronic receives order for an FPS 6100 Evo

Retrieved on: 
Tuesday, July 13, 2021
Smartphones, Smartphone, Intersil, Photomask, Technology, Computing, Classes of computers

STOCKHOLM, July 13, 2021 /PRNewswire/ -- Mycronic AB (publ) has received an order for an FPS 6100 Evo from an existing customer in Asia.

Key Points: 
  • STOCKHOLM, July 13, 2021 /PRNewswire/ -- Mycronic AB (publ) has received an order for an FPS 6100 Evo from an existing customer in Asia.
  • The order value is in the range of USD 3-5 million and delivery of the system is planned for the fourth quarter of 2021.
  • FPS 6100 Evo is a mask writer for the multi-purpose market, a broad segment that comprises many different areas of application.
  • Mycronic also provides mask writers for manufacturing photomasks for display manufacturing, such as TVs, smartphones and tablets and production of semiconductors.

Mycronic receives order for an FPS 6100 Evo

Retrieved on: 
Tuesday, July 13, 2021
Smartphones, Smartphone, Intersil, Photomask, Technology, Computing, Classes of computers

STOCKHOLM, July 13, 2021 /PRNewswire/ -- Mycronic AB (publ) has received an order for an FPS 6100 Evo from an existing customer in Asia.

Key Points: 
  • STOCKHOLM, July 13, 2021 /PRNewswire/ -- Mycronic AB (publ) has received an order for an FPS 6100 Evo from an existing customer in Asia.
  • The order value is in the range of USD 3-5 million and delivery of the system is planned for the fourth quarter of 2021.
  • FPS 6100 Evo is a mask writer for the multi-purpose market, a broad segment that comprises many different areas of application.
  • Mycronic also provides mask writers for manufacturing photomasks for display manufacturing, such as TVs, smartphones and tablets and production of semiconductors.