MDI

Draft guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and chronic obstructive pulmonary disease (COPD)

Retrieved on: 
Thursday, April 18, 2024

21

Key Points: 
    • 21

      Guideline on the requirements for demonstrating
      therapeutic equivalence between orally inhaled products
      (OIP) for asthma and chronic obstructive pulmonary
      disease (COPD)

      22

      Table of contents

      23

      Executive summary ..................................................................................... 4

      24

      1.

    • Primary PK parameters to be analysed and acceptance criteria .............................. 14

      43

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      51

      6.4.

    • Definitions ........................................................................................... 18

      56

      List of Abbreviations.................................................................................. 20

      57

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      58

      Executive summary

      59

      This guideline is the 2nd revision of the CHMP Guideline formerly called ?Guideline on the requirements

      60

      for clinical documentation for orally inhaled products (OIP) including the requirements for

      61

      demonstration of therapeutic equivalence between two inhaled products for use in the treatment of

      62

      asthma and chronic obstructive pulmonary disease (COPD) in adults and for use in the treatment of

      63

      asthma in children and adolescents?.

    • It addresses the requirements for demonstration of therapeutic

      64

      equivalence (TE) between orally inhaled products containing the same active moiety(ies).

    • It is generally not recommended to aim at demonstrating TE using pharmacodynamic

      70

      or clinical endpoints as these are deemed insensitive.

    • This

      83

      guideline is directed particularly at the requirements for demonstrating TE between OIPs containing the

      84

      same active moiety(ies) and used in the management and treatment of patients with asthma and/or

      85

      COPD.

    • 86

      The guideline was first published as points to consider in 2004 and revised for the first time and

      87

      became guideline in 2009.

    • Since then, a number of Q&A documents have been published by Quality

      88

      Working Party (QWP) and former Pharmacokinetic Working Party (PKWP).

    • Scope

      93

      This document provides guidance on the requirements for demonstrating TE between OIPs, including

      94

      both, single active substance products and combination products.

    • Also, in the case that there is a need

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      98

      to confirm similarity to a product for which literature data is available (e.g., well-established use

      99

      applications), the same principles apply.

    • Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      132

      4.

    • Products for nebulisation

      177

      This guideline applies also for products for nebulisation although it is acknowledged that the

      178

      performance of these is highly dependent on the nebuliser used.

    • In vitro criteria for demonstrating TE

      206

      The test and reference products should be compared in order to conclude on TE.

    • Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      211
      212

      2.

    • Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      353

      6.2.

    • Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      392

      6.3.

    • If the
      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      432

      different strengths of the test and the reference product are not shown to be proportional in vitro, in

      433

      vivo equivalence should be demonstrated with a bracketing approach.

    • Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      471

      6.4.

    • Griffin, 1964

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      553

      which both reference product-na?ve and experienced users should be included.

    • 568

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      569

      10.

    • Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      Product strength

      Product strength may be either the delivered
      dose or the metered dose.

    • 570

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      571

      List of Abbreviations
      APSD

      Aerodynamic Particle Size Distribution

      AUC

      Area Under the Curve

      CHMP

      Committee for Medicinal Products for Human
      Use

      CI

      Confidence Interval

      Cmax

      Peak concentration

      COPD

      Chronic Obstructive Pulmonary Disease

      DPI

      Dry Powder Inhaler

      FPD

      Fine Particle Dose

      GI

      Gastrointestinal

      ICH

      International Conference on Harmonisation

      IVIVC

      In vitro in vivo correlation

      MDI

      Metered Dose Inhaler

      OIP

      Orally Inhaled Product

      PD

      Pharmacodynamic

      PK

      Pharmacokinetic

      pMDI

      Pressurised Metered Dose Inhaler

      QWP

      Quality Working Party

      SmPC

      Summary of Product Characteristics

      TE

      Therapeutic equivalence

      tmax

      Time to peak concentration

      572

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

Draft guideline on the pharmaceutical quality of inhalation and nasal medicinal products

Retrieved on: 
Thursday, April 18, 2024

17

Key Points: 
    • 17

      Guideline on the pharmaceutical quality of inhalation and
      nasal medicinal products

      18

      Table of contents

      19

      Executive summary ..................................................................................... 3

      20

      1.

    • Lifecycle management ........................................................................................ 28

      49

      Definitions ................................................................................................. 29

      16

      50
      51

      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 2/30

      52

      Executive summary

      53

      This guideline is the first revision of the guideline on pharmaceutical quality of inhalation and nasal

      54

      products (EMEA/CHMP/QWP/49313/2005 Corr).

    • Quality aspects specific to inhalation and nasal medicinal products are discussed, the need for

      66

      safety testing (e.g., for excipients and leachables) is also considered.

    • 69

      Detailed guidance on pharmaceutical development study designs (e.g., priming studies) and the

      70

      analytical procedures primarily used for inhalation and nasal medicinal products (e.g., cascade

      71

      impactor analysis) is not included in this guideline.

    • Scope

      74

      The guideline addresses requirements "on the quality of inhalation and nasal medicinal products" in

      75

      new marketing authorisation applications, including abridged applications.

    • Liquid inhalation anaesthetics and nasal ointments, creams and gels are

      88

      excluded, however the general principles described in this guideline should be considered.

    • 118

      Different polymorphic forms including any amorphous content could affect the quality or performance

      119

      of the finished medicinal product.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 4/30

      132

      The primary packaging, type of inhaler and, if necessary, the secondary packaging or other

      133

      components required for reasons of stability should be described.

    • Pharmaceutical
      development study

      (a) Physical
      characterisation
      (b) Minimum fill
      justification
      (c) Extractable
      volume

      Pressurised

      Dry powder

      Preparations for

      Non-

      metered-

      inhalers (DPI)

      nebulisation

      pressurised

      dose

      metered-

      Device-

      Pre-

      Single-

      Multi-

      (pMDI)

      metered

      metered

      dose

      dose

      inhalers

      Yesa

      Yes

      Yes

      Yesa

      Yesa

      Yesa

      Yes

      Yes

      Yes

      Yes

      Yes

      Yes

      No

      No

      No

      Yes

      No

      No

      inhalers

      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      dose

      Page 5/30

      Table 4.2.1.

    • The last doses delivered by

      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 7/30

      179

      the inhaler as defined by the label claim, should meet the finished medicinal product specification limits

      180

      for delivered dose and fine particle dose.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 9/30

      263
      264

      4.2.2.8.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 11/30

      345

      Instructions regarding cold temperature use should be provided in the product information.

    • Finished medicinal
      product

      Pressurised

      Dry powder inhalers

      Preparations for

      metered-

      (DPI)

      nebulisation

      dose

      Nonpressurised
      metered-dose

      Device-

      Pre-

      Single-

      Multi-

      (pMDI)

      metered

      metered

      dose

      dose

      inhalers

      (a) Description

      Yes

      Yes

      Yes

      Yes

      Yes

      Yes

      (b) Assay

      Yes

      Yes

      Yes

      Yes

      Yes

      Yes

      (c) Moisture content

      Yes

      Yes

      Yes

      No

      No

      No

      Yes

      Yes

      Yes

      No

      No

      Yes

      Yes

      Yes

      Yes

      No

      No

      Yes

      specification test

      (d) Mean delivered
      dose
      (e) Uniformity of
      delivered dose

      inhalers

      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 15/30

      Table 4.2.2.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 16/30

      510

      4.2.5.4.

    • The proposed specification limits should take into account the shelf-life performance of the
      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 17/30

      552

      medicinal product.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 18/30

      586

      All medical devices, including inhalers and nasal devices, have to fulfil the general requirements as

      587

      outlined in the Medical Device Regulation (EU) 2017/745.

    • Stability (CTD 3.2.P.8)

      598

      All inhalation medicinal products should be tested on stability against the stability indicating tests

      599

      included in the finished medicinal product specification.

    • Quality data requirements as

      619

      described in this guideline should be met, supplemented by appropriate comparative quality and

      620

      clinical data with respect to the chosen reference medicinal product.

    • 621

      For inhalation medicinal products comparative in vitro data between the abridged application medicinal

      622

      product and the reference medicinal product must be provided.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 20/30

      670

      Nature and contents of container: The type of the device and its components should be listed.

    • Nasal medicinal products

      695

      Inhalation and nasal medicinal products have many similarities and therefore, most of the

      696

      requirements specified for inhalation medicinal products in section 4 also apply for nasal medicinal

      697

      products.

    • One difference between inhalation and nasal medicinal products is the desired

      698

      particle/droplet size of the finished medicinal product.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 21/30

      704

      5.2.

    • Nasal liquids
      Pharmaceutical
      development
      study

      Pressurised

      Nasal

      metered-

      powders,

      dose nasal

      device-

      spray

      metered

      NonSingledose
      drops

      Multidose
      drops

      Single-

      pressurised

      dose

      multidose

      spray

      metereddose spray

      (a) Physical
      characterisation
      (b) Minimum fill
      justification
      (d) Extractables /
      leachables

      Yesa

      Yes

      Yesa

      Yesa

      Yesa

      Yesa

      Yes

      Yes

      Yes

      Yes

      Yes

      Yes

      Yes

      No

      Yes

      Yes

      Yes

      Yes

      Yes

      Yes

      No

      No

      Yes

      Yes

      Yes

      Yes

      No

      No

      No

      Yes

      Yes

      Yes

      No

      No

      Yes

      Yes

      (f) Particle /
      droplet size
      distribution
      (g) Uniformity of
      delivered dose
      through container
      life
      (j) Actuator /
      mouthpiece
      deposition

      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 22/30

      Table 5.2.1.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 23/30

      728

      5.2.2.2.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 24/30

      769

      5.2.5.

    • Quality data requirements as described in

      799

      this guideline should be met, supplemented by appropriate comparative quality and clinical data with

      800

      respect to the chosen reference medicinal product.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 27/30

      849

      5.5.

    • 866

      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 28/30

      867

      Definitions
      Activation:

      The act of setting in motion the delivery device.

    • Delivery device:

      The sum of component(s) of the container closure system responsible for
      delivering the active substance to the respiratory tract (inhalation medicinal
      product) or the nasal and/or pharyngeal region (nasal medicinal product).

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 29/30

      Label claim:

      The amount of active substance (usually on a per actuation basis) declared
      on the label of the medicinal product.

    • Nasal medicinal

      A finished medicinal product (including the delivery device, where

      product:

      applicable) whose intended site of deposition is the nasal and/or pharyngeal
      region.

    • 868
      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 30/30

Draft guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and chronic obstructive pulmonary disease (COPD)

Retrieved on: 
Thursday, April 18, 2024

21

Key Points: 
    • 21

      Guideline on the requirements for demonstrating
      therapeutic equivalence between orally inhaled products
      (OIP) for asthma and chronic obstructive pulmonary
      disease (COPD)

      22

      Table of contents

      23

      Executive summary ..................................................................................... 4

      24

      1.

    • Primary PK parameters to be analysed and acceptance criteria .............................. 14

      43

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      51

      6.4.

    • Definitions ........................................................................................... 18

      56

      List of Abbreviations.................................................................................. 20

      57

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      58

      Executive summary

      59

      This guideline is the 2nd revision of the CHMP Guideline formerly called ?Guideline on the requirements

      60

      for clinical documentation for orally inhaled products (OIP) including the requirements for

      61

      demonstration of therapeutic equivalence between two inhaled products for use in the treatment of

      62

      asthma and chronic obstructive pulmonary disease (COPD) in adults and for use in the treatment of

      63

      asthma in children and adolescents?.

    • It addresses the requirements for demonstration of therapeutic

      64

      equivalence (TE) between orally inhaled products containing the same active moiety(ies).

    • It is generally not recommended to aim at demonstrating TE using pharmacodynamic

      70

      or clinical endpoints as these are deemed insensitive.

    • This

      83

      guideline is directed particularly at the requirements for demonstrating TE between OIPs containing the

      84

      same active moiety(ies) and used in the management and treatment of patients with asthma and/or

      85

      COPD.

    • 86

      The guideline was first published as points to consider in 2004 and revised for the first time and

      87

      became guideline in 2009.

    • Since then, a number of Q&A documents have been published by Quality

      88

      Working Party (QWP) and former Pharmacokinetic Working Party (PKWP).

    • Scope

      93

      This document provides guidance on the requirements for demonstrating TE between OIPs, including

      94

      both, single active substance products and combination products.

    • Also, in the case that there is a need

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      98

      to confirm similarity to a product for which literature data is available (e.g., well-established use

      99

      applications), the same principles apply.

    • Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      132

      4.

    • Products for nebulisation

      177

      This guideline applies also for products for nebulisation although it is acknowledged that the

      178

      performance of these is highly dependent on the nebuliser used.

    • In vitro criteria for demonstrating TE

      206

      The test and reference products should be compared in order to conclude on TE.

    • Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      211
      212

      2.

    • Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      353

      6.2.

    • Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      392

      6.3.

    • If the
      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      432

      different strengths of the test and the reference product are not shown to be proportional in vitro, in

      433

      vivo equivalence should be demonstrated with a bracketing approach.

    • Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      471

      6.4.

    • Griffin, 1964

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      553

      which both reference product-na?ve and experienced users should be included.

    • 568

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      569

      10.

    • Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      Product strength

      Product strength may be either the delivered
      dose or the metered dose.

    • 570

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

      571

      List of Abbreviations
      APSD

      Aerodynamic Particle Size Distribution

      AUC

      Area Under the Curve

      CHMP

      Committee for Medicinal Products for Human
      Use

      CI

      Confidence Interval

      Cmax

      Peak concentration

      COPD

      Chronic Obstructive Pulmonary Disease

      DPI

      Dry Powder Inhaler

      FPD

      Fine Particle Dose

      GI

      Gastrointestinal

      ICH

      International Conference on Harmonisation

      IVIVC

      In vitro in vivo correlation

      MDI

      Metered Dose Inhaler

      OIP

      Orally Inhaled Product

      PD

      Pharmacodynamic

      PK

      Pharmacokinetic

      pMDI

      Pressurised Metered Dose Inhaler

      QWP

      Quality Working Party

      SmPC

      Summary of Product Characteristics

      TE

      Therapeutic equivalence

      tmax

      Time to peak concentration

      572

      Guideline on the requirements for demonstrating therapeutic equivalence between orally inhaled products (OIP) for asthma and
      chronic obstructive pulmonary disease (COPD)
      EMA/CHMP/101453/2024

Draft guideline on the pharmaceutical quality of inhalation and nasal medicinal products

Retrieved on: 
Thursday, April 18, 2024

17

Key Points: 
    • 17

      Guideline on the pharmaceutical quality of inhalation and
      nasal medicinal products

      18

      Table of contents

      19

      Executive summary ..................................................................................... 3

      20

      1.

    • Lifecycle management ........................................................................................ 28

      49

      Definitions ................................................................................................. 29

      16

      50
      51

      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 2/30

      52

      Executive summary

      53

      This guideline is the first revision of the guideline on pharmaceutical quality of inhalation and nasal

      54

      products (EMEA/CHMP/QWP/49313/2005 Corr).

    • Quality aspects specific to inhalation and nasal medicinal products are discussed, the need for

      66

      safety testing (e.g., for excipients and leachables) is also considered.

    • 69

      Detailed guidance on pharmaceutical development study designs (e.g., priming studies) and the

      70

      analytical procedures primarily used for inhalation and nasal medicinal products (e.g., cascade

      71

      impactor analysis) is not included in this guideline.

    • Scope

      74

      The guideline addresses requirements "on the quality of inhalation and nasal medicinal products" in

      75

      new marketing authorisation applications, including abridged applications.

    • Liquid inhalation anaesthetics and nasal ointments, creams and gels are

      88

      excluded, however the general principles described in this guideline should be considered.

    • 118

      Different polymorphic forms including any amorphous content could affect the quality or performance

      119

      of the finished medicinal product.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 4/30

      132

      The primary packaging, type of inhaler and, if necessary, the secondary packaging or other

      133

      components required for reasons of stability should be described.

    • Pharmaceutical
      development study

      (a) Physical
      characterisation
      (b) Minimum fill
      justification
      (c) Extractable
      volume

      Pressurised

      Dry powder

      Preparations for

      Non-

      metered-

      inhalers (DPI)

      nebulisation

      pressurised

      dose

      metered-

      Device-

      Pre-

      Single-

      Multi-

      (pMDI)

      metered

      metered

      dose

      dose

      inhalers

      Yesa

      Yes

      Yes

      Yesa

      Yesa

      Yesa

      Yes

      Yes

      Yes

      Yes

      Yes

      Yes

      No

      No

      No

      Yes

      No

      No

      inhalers

      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      dose

      Page 5/30

      Table 4.2.1.

    • The last doses delivered by

      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 7/30

      179

      the inhaler as defined by the label claim, should meet the finished medicinal product specification limits

      180

      for delivered dose and fine particle dose.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 9/30

      263
      264

      4.2.2.8.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 11/30

      345

      Instructions regarding cold temperature use should be provided in the product information.

    • Finished medicinal
      product

      Pressurised

      Dry powder inhalers

      Preparations for

      metered-

      (DPI)

      nebulisation

      dose

      Nonpressurised
      metered-dose

      Device-

      Pre-

      Single-

      Multi-

      (pMDI)

      metered

      metered

      dose

      dose

      inhalers

      (a) Description

      Yes

      Yes

      Yes

      Yes

      Yes

      Yes

      (b) Assay

      Yes

      Yes

      Yes

      Yes

      Yes

      Yes

      (c) Moisture content

      Yes

      Yes

      Yes

      No

      No

      No

      Yes

      Yes

      Yes

      No

      No

      Yes

      Yes

      Yes

      Yes

      No

      No

      Yes

      specification test

      (d) Mean delivered
      dose
      (e) Uniformity of
      delivered dose

      inhalers

      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 15/30

      Table 4.2.2.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 16/30

      510

      4.2.5.4.

    • The proposed specification limits should take into account the shelf-life performance of the
      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 17/30

      552

      medicinal product.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 18/30

      586

      All medical devices, including inhalers and nasal devices, have to fulfil the general requirements as

      587

      outlined in the Medical Device Regulation (EU) 2017/745.

    • Stability (CTD 3.2.P.8)

      598

      All inhalation medicinal products should be tested on stability against the stability indicating tests

      599

      included in the finished medicinal product specification.

    • Quality data requirements as

      619

      described in this guideline should be met, supplemented by appropriate comparative quality and

      620

      clinical data with respect to the chosen reference medicinal product.

    • 621

      For inhalation medicinal products comparative in vitro data between the abridged application medicinal

      622

      product and the reference medicinal product must be provided.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 20/30

      670

      Nature and contents of container: The type of the device and its components should be listed.

    • Nasal medicinal products

      695

      Inhalation and nasal medicinal products have many similarities and therefore, most of the

      696

      requirements specified for inhalation medicinal products in section 4 also apply for nasal medicinal

      697

      products.

    • One difference between inhalation and nasal medicinal products is the desired

      698

      particle/droplet size of the finished medicinal product.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 21/30

      704

      5.2.

    • Nasal liquids
      Pharmaceutical
      development
      study

      Pressurised

      Nasal

      metered-

      powders,

      dose nasal

      device-

      spray

      metered

      NonSingledose
      drops

      Multidose
      drops

      Single-

      pressurised

      dose

      multidose

      spray

      metereddose spray

      (a) Physical
      characterisation
      (b) Minimum fill
      justification
      (d) Extractables /
      leachables

      Yesa

      Yes

      Yesa

      Yesa

      Yesa

      Yesa

      Yes

      Yes

      Yes

      Yes

      Yes

      Yes

      Yes

      No

      Yes

      Yes

      Yes

      Yes

      Yes

      Yes

      No

      No

      Yes

      Yes

      Yes

      Yes

      No

      No

      No

      Yes

      Yes

      Yes

      No

      No

      Yes

      Yes

      (f) Particle /
      droplet size
      distribution
      (g) Uniformity of
      delivered dose
      through container
      life
      (j) Actuator /
      mouthpiece
      deposition

      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 22/30

      Table 5.2.1.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 23/30

      728

      5.2.2.2.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 24/30

      769

      5.2.5.

    • Quality data requirements as described in

      799

      this guideline should be met, supplemented by appropriate comparative quality and clinical data with

      800

      respect to the chosen reference medicinal product.

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 27/30

      849

      5.5.

    • 866

      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 28/30

      867

      Definitions
      Activation:

      The act of setting in motion the delivery device.

    • Delivery device:

      The sum of component(s) of the container closure system responsible for
      delivering the active substance to the respiratory tract (inhalation medicinal
      product) or the nasal and/or pharyngeal region (nasal medicinal product).

    • Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 29/30

      Label claim:

      The amount of active substance (usually on a per actuation basis) declared
      on the label of the medicinal product.

    • Nasal medicinal

      A finished medicinal product (including the delivery device, where

      product:

      applicable) whose intended site of deposition is the nasal and/or pharyngeal
      region.

    • 868
      Guideline on the pharmaceutical quality of inhalation and nasal medicinal products
      EMA/CHMP/20607/2024

      Page 30/30

Qualcomm 8295 Based Cockpit Domain Controller Dismantling Analysis Report: Key Parameters and Estimated Cost, Main Components, Disassembly, Master Chip and Storage, MCU, Ethernet

Retrieved on: 
Friday, March 15, 2024

DUBLIN, March 15, 2024 /PRNewswire/ -- The "Qualcomm 8295 Based Cockpit Domain Controller Dismantling Analysis Report" report has been added to ResearchAndMarkets.com's offering.

Key Points: 
  • DUBLIN, March 15, 2024 /PRNewswire/ -- The "Qualcomm 8295 Based Cockpit Domain Controller Dismantling Analysis Report" report has been added to ResearchAndMarkets.com's offering.
  • The publisher dismantled 8295-based cockpit domain controller of an electric sedan launched in December 2023, and produced the report SA8295P Series Based Cockpit Domain Controller Analysis and Dismantling.
  • The cockpit domain controller has two versions, high configuration and low configuration, both of which use Qualcomm SA8295P chips.
  • This article carries out a rough dismantling analysis on the DHU, involving overview, master chip, storage, MCU and radio.

OPTRUST FULLY FUNDED FOR 15TH CONSECUTIVE YEAR

Retrieved on: 
Tuesday, March 12, 2024

In 2023, OPTrust remained fully funded for the 15th consecutive year and achieved a net investment return of 5.3 per cent.

Key Points: 
  • In 2023, OPTrust remained fully funded for the 15th consecutive year and achieved a net investment return of 5.3 per cent.
  • "At OPTrust, we have a clear purpose – to deliver peace of mind in retirement to our members," said Peter Lindley, President and CEO of OPTrust.
  • "For the 15th consecutive year, OPTrust is fully funded, and the people we serve can continue to rely on a secure, sustainable pension."
  • In 2023, OPTrust welcomed five additional nonprofit organizations and nearly 1,000 new members to reach a total membership of over 4,200 in OPTrust Select.

INHALE-3 Study’s Initial Meal Challenge Results Comparing Afrezza® Head-To-Head With Multiple Daily Injections (MDI) and Insulin Pumps

Retrieved on: 
Monday, March 11, 2024

INHALE-3 is a Phase 4 U.S. clinical trial evaluating inhaled insulin (plus basal) vs. standard of care.

Key Points: 
  • INHALE-3 is a Phase 4 U.S. clinical trial evaluating inhaled insulin (plus basal) vs. standard of care.
  • “In this large, randomized trial utilizing more appropriate dose conversion, we are excited to see meal challenge results support the safety and efficacy of inhaled insulin from the start.”
    INHALE-3 is a 17-week randomized controlled trial with a 13-week extension.
  • Subjects utilizing inhaled insulin received a higher initial conversion dose than in the current label.
  • For the meal challenge, the inhaled insulin group took an inhaled insulin dose immediately prior to a standardized meal (a 240 calorie nutritional shake) whereas those using usual care used RAA 5-15 minutes prior to the meal.

embecta-sponsored Educational Symposium and Abstracts at ATTD Highlight Role of Insulin Pumps in the Management of Type 2 Diabetes

Retrieved on: 
Wednesday, March 6, 2024

Additionally, six embecta-sponsored abstracts focusing on injection and insulin pump therapies have been selected for presentation as scientific posters at ATTD 2024.

Key Points: 
  • Additionally, six embecta-sponsored abstracts focusing on injection and insulin pump therapies have been selected for presentation as scientific posters at ATTD 2024.
  • Entitled “Unlocking the potential of insulin pumps for personalized T2D care,” the symposium aims to highlight the significance of insulin pump therapy among the extensive treatment options available for type 2 diabetes (T2D).
  • The six embecta-sponsored abstracts set for presentation as scientific posters, include robust data about insulin therapy via both pumps and multiple daily injections (MDI).
  • Another poster highlights data showing that in individuals with type 2 diabetes, insulin pump therapy eases constraints imposed by diabetes management and improves quality of life.

MannKind Announces New Clinical Data From Inhale-3 Study to be Presented by Dr. Irl B. Hirsch at ATTD on March 8

Retrieved on: 
Tuesday, March 5, 2024

INHALE-3 is a Phase 4 U.S. clinical trial evaluating inhaled insulin (plus basal) vs. standard of care.

Key Points: 
  • INHALE-3 is a Phase 4 U.S. clinical trial evaluating inhaled insulin (plus basal) vs. standard of care.
  • “With ABC and this trial, we used a higher initial conversion dose for inhaled insulin than in our current label.
  • In the ABC study, this conversion dose produced significantly lowered post-prandial glucose levels that peaked 30 minutes sooner than standard of care.
  • More information on the study is available at: ClinicalTrials.gov(NCT05904743) .

Insulet to Present Results from First Omnipod® 5 Randomized Controlled Trial (OP5-003) at the 17th International Conference on Advanced Technologies & Treatments for Diabetes (ATTD)

Retrieved on: 
Tuesday, March 5, 2024

“We are thrilled to unveil the results of our inaugural randomized controlled trial with groundbreaking insights from international Omnipod 5 users,” said Dr. Trang Ly MBBS, FRACP, PhD, Insulet Senior Vice President and Medical Director.

Key Points: 
  • “We are thrilled to unveil the results of our inaugural randomized controlled trial with groundbreaking insights from international Omnipod 5 users,” said Dr. Trang Ly MBBS, FRACP, PhD, Insulet Senior Vice President and Medical Director.
  • It is the first Omnipod 5 randomized controlled trial to date, and the first time the system has been evaluated in participants living outside of the United States.
  • This presentation will take place on Thursday, March 7 at 12:00 p.m. CET and Friday, March 8 at 10:30 a.m. CET.
  • Insulet representatives will be available to provide Omnipod product demonstrations to conference attendees, offering healthcare professionals the chance to experience Omnipod DASH and Omnipod 5 first-hand.