Voltage regulation

Vishay Intertechnology IHLP® Commercial Inductor Offers High Temperature Operation to +155 °C in 7575 Case Size

Retrieved on: 
Monday, August 2, 2021

MALVERN, Pa., Aug. 02, 2021 (GLOBE NEWSWIRE) -- Vishay Intertechnology, Inc. (NYSE: VSH) today introduced a new commercial IHLP low profile, high current inductor that is the industrys first composite inductor in the 19 mm by 19 mm by 7 mm 7575 case size.

Key Points: 
  • MALVERN, Pa., Aug. 02, 2021 (GLOBE NEWSWIRE) -- Vishay Intertechnology, Inc. (NYSE: VSH) today introduced a new commercial IHLP low profile, high current inductor that is the industrys first composite inductor in the 19 mm by 19 mm by 7 mm 7575 case size.
  • Offering high temperature operation to +155 C for computer, telecom, and industrial applications, the Vishay Dale IHLP - 7575GZ-51 offers up to 30 % lower DCR and up to 35 % higher current ratings than devices in the 6767 case size, at a 50 % lower cost than devices in the 8787 case.
  • The inductor released today is optimized for energy storage in DC/DC converters up to 2 MHz and high current filtering applications up to the SRF of the inductor.
  • Applications for the device include notebooks, desktops, and servers; low profile, high current power supplies; POL converters; battery-powered devices; and distributed power systems and FPGAs.

Dual Winding TLVR Inductor and Compensation Choke, 105NH TO 200NH, 125APK

Retrieved on: 
Friday, July 9, 2021

The TLVR topology enables faster transient response and utilizes a dual winding power bead inductor.

Key Points: 
  • The TLVR topology enables faster transient response and utilizes a dual winding power bead inductor.
  • Traditionally, these applications have used single winding inductor used in a multi-phase buck topology which allows currents to be distributed though parallel paths or phases.
  • For the inductor, this space constraint creates skinny but tall components that can become mechanically unstable which limits the ability to shrink the inductor width.
  • The trans-inductor is very similar to a traditional one turn VR inductor, but has the addition of a second tightly coupled winding.

Maxim Integrated's Automotive Backlight Driver with Integrated Boost Converter Sustains Full, Constant Brightness of In-Car Displays Even During Cold Crank Conditions

Retrieved on: 
Tuesday, July 6, 2021

SAN JOSE, Calif., July 6, 2021 /PRNewswire/ --Maxim Integrated Products, Inc. (NASDAQ: MXIM) introduces the four-channel, low-voltage MAX25512 automotiveLED backlight driver with integrated boost converter.

Key Points: 
  • SAN JOSE, Calif., July 6, 2021 /PRNewswire/ --Maxim Integrated Products, Inc. (NASDAQ: MXIM) introduces the four-channel, low-voltage MAX25512 automotiveLED backlight driver with integrated boost converter.
  • It is the only integrated solution that retains full, constant brightness of in-car displays even during extreme cold crank conditions down to 3V input voltage.
  • The highly integrated LED driver includes four 120mA channels with the industry's highest efficiency at 2.2MHz operation.
  • Maxim Integrated's MAX25512 LED backlight driver operates down to 3V after startup without the addition of a pre-boost converter, protecting the display from these power disruptions.

Power Integrations Incorporates Lossless Zero-Cross Detection and X-Capacitor Discharge into New LinkSwitch-TNZ Offline Switcher ICs

Retrieved on: 
Wednesday, June 16, 2021

Power Integrations (Nasdaq: POWI ), the leader in high-voltage integrated circuits for energy-efficient power conversion, today announced LinkSwitch-TNZ , a new switching power supply IC that combines offline power conversion, lossless zero-cross detection and, optionally, X-capacitor discharge functions in a compact SO-8C package.

Key Points: 
  • Power Integrations (Nasdaq: POWI ), the leader in high-voltage integrated circuits for energy-efficient power conversion, today announced LinkSwitch-TNZ , a new switching power supply IC that combines offline power conversion, lossless zero-cross detection and, optionally, X-capacitor discharge functions in a compact SO-8C package.
  • View the full release here: https://www.businesswire.com/news/home/20210616005330/en/
    Power Integrations Incorporates Lossless Zero-Cross Detection and X-Capacitor Discharge into New LinkSwitch-TNZ Offline Switcher ICs.
  • (Photo: Business Wire)
    Adnaan Lokhandwala, product marketing manager at Power Integrations said: The new LinkSwitch-TNZ ICs provide an accurate signal indicating that the sinusoidal AC line is at zero volts.
  • Power Integrations, Inc. is a leading innovator in semiconductor technologies for high-voltage power conversion.

Ideal Power Vice President of Business Development Jeff Knapp to Participate in Water Tower Research Fireside Chat Series on Thursday, June 10, 2021 at 2:00 pm EDT

Retrieved on: 
Tuesday, June 8, 2021

AUSTIN, Texas, June 08, 2021 (GLOBE NEWSWIRE) -- Ideal Power Inc. (Nasdaq: IPWR), pioneering the development and commercialization of highly efficient and broadly patented B-TRAN bi-directional power switches, today announced that that Jeff Knapp, Vice President Business Development, will participate in Water Tower Research Fireside Chat Series on Thursday, June 10, 2021 at 2:00 pm EDT.

Key Points: 
  • AUSTIN, Texas, June 08, 2021 (GLOBE NEWSWIRE) -- Ideal Power Inc. (Nasdaq: IPWR), pioneering the development and commercialization of highly efficient and broadly patented B-TRAN bi-directional power switches, today announced that that Jeff Knapp, Vice President Business Development, will participate in Water Tower Research Fireside Chat Series on Thursday, June 10, 2021 at 2:00 pm EDT.
  • Investors and other persons interested in participating in the event must register using the link below.
  • B-TRAN is a unique double-sided bi-directional AC switch able to deliver substantial performance improvements over today's conventional power semiconductors.
  • Ideal Power believes B-TRAN modules will reduce conduction and switching losses, complexity of thermal management and operating cost in medium voltage AC power switching and control circuitry.

EPC’s 1 kW, 48 V to 12 V LLC Power Conversion Demonstration Board Delivers Best-in-Class Power Density of 1226 W/in3

Retrieved on: 
Tuesday, May 25, 2021

This demonstration board features the 100V EPC2218 and 40 V EPC20 24 GaN FETs.

Key Points: 
  • This demonstration board features the 100V EPC2218 and 40 V EPC20 24 GaN FETs.
  • This new demonstration board can operate from an input voltage between 36 V and 60 V and delivers up to 83.3 A load current.
  • The peak efficiency from 48 V to 12 V is 98% and the full load efficiency, at 12 V when delivering 1 kW, is 97%.
  • eGaN FETs and integrated circuits increase power density for 48 V to 12 V converters and address data center application demands for higher power in a small size, said Alex Lidow, CEO of EPC.

Global Frequency Converter Market (2021 to 2026) - Increasing Demand for Water & Wastewater Treatment Plants is Driving Growth - ResearchAndMarkets.com

Retrieved on: 
Thursday, April 15, 2021

Static frequency converters are expected to witness the highest revenue share by product type, driving the market growth.

Key Points: 
  • Static frequency converters are expected to witness the highest revenue share by product type, driving the market growth.
  • What is the frequency converter market size and growth rate during the forecast period?\n2.
  • What are market opportunities and trends enabling the frequency converter market growth?\n4.
  • What is the growth of the APAC frequency converter market during the forecast period?\n'

Molded Powder Inductors

Retrieved on: 
Wednesday, March 24, 2021

San Diego, March 24, 2021 (GLOBE NEWSWIRE) -- PulseElectronics is excited to introduce a total of nine new series ofautomotiveand commercial grade moldedpowder inductors .The PA540x, PA544x (commercial grade) and PM540x, PM544x (automotive grade) range in size from 3.73.41.2mm up to 1412.83.5mm.

Key Points: 
  • San Diego, March 24, 2021 (GLOBE NEWSWIRE) -- PulseElectronics is excited to introduce a total of nine new series ofautomotiveand commercial grade moldedpowder inductors .The PA540x, PA544x (commercial grade) and PM540x, PM544x (automotive grade) range in size from 3.73.41.2mm up to 1412.83.5mm.
  • These platforms add to Pulses already popular line of high efficiency power inductors.
  • They are ideal for high current, non-isolated DC/DC converters and voltage regulators and range in inductance from 100nH to 70uH with current up to 55Apk.
  • This significant product expansion ensures that Pulse has a soft-saturation, low audible noise power inductor to meet any customers needs.

Uprated LinkSwitch AC-DC Converter ICs From Power Integrations Increase Available Current by 60%

Retrieved on: 
Tuesday, March 23, 2021

The new LNK3207 ICs facilitate higher-power offline buck converter designs for appliances and industrial applications by increasing the available output current from 360 mA to 575 mA, while also reducing BOM count.

Key Points: 
  • The new LNK3207 ICs facilitate higher-power offline buck converter designs for appliances and industrial applications by increasing the available output current from 360 mA to 575 mA, while also reducing BOM count.
  • View the full release here: https://www.businesswire.com/news/home/20210323005454/en/
    Power Integrations' LinkSwitch-TN2 ICs increase output current from 360 mA to 575 mA & target mass-market appliances such as washers, dryers, coffee makers and more.
  • (Photo: Power Integrations)
    Silvestro Fimiani, product marketing manager at Power Integrations said: These new LinkSwitch-TN2 ICs are pin-to-pin compatible with previous generations, making it simple for customers to upgrade to higher-power designs.
  • The LNK3207 AC-DC converter ICs increase the available current by 60% while also delivering greater than 80% efficiency and no-load consumption of less than 30 mW.

Magnachip Unveils LDO Linear Regulator Featuring Ultra-Fast Transient Response for UFS-Based Multi-Chip Packages

Retrieved on: 
Monday, March 15, 2021

SEOUL, South Korea, March 15, 2021 /PRNewswire/ --Magnachip Semiconductor Corporation ("Magnachip") (NYSE: MX) announced today that the company has released a new Low-dropout (LDO) linear regulator featuring an ultra-fast transient responsefor a Universal Flash Storage (UFS)-based Multi-Chip Package (MCP).

Key Points: 
  • SEOUL, South Korea, March 15, 2021 /PRNewswire/ --Magnachip Semiconductor Corporation ("Magnachip") (NYSE: MX) announced today that the company has released a new Low-dropout (LDO) linear regulator featuring an ultra-fast transient responsefor a Universal Flash Storage (UFS)-based Multi-Chip Package (MCP).
  • UFS-based MCP is a memory module that integrates UFS controller and memory ICs, such as DRAM or NAND flash.
  • Magnachip's LDO linear regulator is designed for the power supply of NAND flash in UFS-based MCP with an input voltage of up to 500mA.
  • In addition, the dropout voltage is as low as 0.3V, which makes the linear regulator perfect for low-power domain operations of batteries.