Deformation

Micropillar compression for finding heat-tolerant alloys

Wednesday, January 13, 2021 - 7:00am

Now, scientists at Kyoto University in Japan have measured what happens at the micro-level when pressure is applied on tiny samples of these materials.

Key Points: 
  • Now, scientists at Kyoto University in Japan have measured what happens at the micro-level when pressure is applied on tiny samples of these materials.
  • The scientists measured the plastic deformation that happened when a tiny probe exerted force on the micropillar specimens with various loading axis orientations.
  • "Our results demonstrate the cutting edge of research into plastic deformation behaviour in crystalline materials," says Kyosuke Kishida, the study's corresponding author.
  • This could mean alpha-Nb5Si3 is at a disadvantage compared to Mo5SiB2 for use as a strengthening component in metal-based alloys.

Valorem Acquires Wing Shear Property in Newfoundland

Tuesday, January 5, 2021 - 7:00am

The Property is subject to a 2% royalty (NSR) with an option to buy back 1.5% for $1 million.

Key Points: 
  • The Property is subject to a 2% royalty (NSR) with an option to buy back 1.5% for $1 million.
  • The gold trend is shear zone hosted (the Wings Pond Shear Zone) and previous historic sampling is reported with assay results up to 12.2 g/t Au from grab samples.
  • The Wings Shear Property has values from grab samples of up to 12.2 g/t Au.
  • Situated in the Gander Tectono-Stratigraphic Geological Zone, the Property is underlain by the Indian Bay Big Pond and the Johnathans Pond formations.

Brunswick Exploration Acquires Highly Prospective Gold Property in Southern New Brunswick

Tuesday, October 27, 2020 - 10:00am

Southern New Brunswick has garnered more interest recently with Galway Metals Clarence Stream project and work on the Cape Spencer and Devils Pike gold deposits.

Key Points: 
  • Southern New Brunswick has garnered more interest recently with Galway Metals Clarence Stream project and work on the Cape Spencer and Devils Pike gold deposits.
  • Prospecting is ongoing and we are preparing a vigorous surface exploration program in 2021 to unlock the potential of the Fundy Gold Project.
  • The area is considered highly prospective as it includes several vein gold-polymetallic showings within the broad Fundy Shear Zone.
  • The Shadow Lake property is also considered highly prospective due to historical visible gold found along the Seven Mile Lake Mylonite on the Belleisle fault.

The Global Strain Gauges Market is expected to grow by USD 64.37 mn during 2020-2024 progressing at a CAGR of 4% during the forecast period

Wednesday, October 14, 2020 - 5:20pm

The analyst has been monitoring the strain gauges market and it is poised to grow by USD 64.37 mn during 2020-2024 progressing at a CAGR of 4% during the forecast period.

Key Points: 
  • The analyst has been monitoring the strain gauges market and it is poised to grow by USD 64.37 mn during 2020-2024 progressing at a CAGR of 4% during the forecast period.
  • Our reports on strain gauges market provides a holistic analysis, market size and forecast, trends, growth drivers, and challenges, as well as vendor analysis covering around 25 vendors.
  • The market is driven by the increasing demand for strain gauges for field testing and stress and strain analysis, large number of applications of strain gauges in industries and growing demand for medical devices and compatible strain gauges.
  • The strain gauges market analysis includes application segment and geographical landscapes.

Cinedigm Releases the Hilarious Comedy CANADIAN STRAIN Available Now on Digital and DVD

Tuesday, September 29, 2020 - 2:25pm

CANADIAN STRAIN is set to release in the U.S.A. today on Digital and DVD.

Key Points: 
  • CANADIAN STRAIN is set to release in the U.S.A. today on Digital and DVD.
  • "The film started with a simple question -- what happens to all the dealers when weed becomes legal?"
  • CANADIAN STRAIN follows cannabis dealer Anne Banting (Salgueiro) who thought, now that its legal, she could finally stop looking over her shoulder.
  • We fell in love with this irreverent comedy as soon as we first screened it, says Tom Malloy, President of Glass House Distribution.

MPX International Introduces Canadian Retail Brand, Strain Rec™ to be Used by Its Wholly-Owned Subsidiary, Canveda Inc., a Licence Holder Under the Cannabis Act (Canada)

Wednesday, August 5, 2020 - 10:05pm

ANY FAILURE TO COMPLY WITH THIS RESTRICTION MAY CONSTITUTE A VIOLATION OF UNITED STATES SECURITIES LAWS.

Key Points: 
  • ANY FAILURE TO COMPLY WITH THIS RESTRICTION MAY CONSTITUTE A VIOLATION OF UNITED STATES SECURITIES LAWS.
  • For additional information on Strain Rec visit the website www.strainrec.ca .
  • Canveda has introduced its unique Canadian recreational brand Strain Rec .
  • This is our initial salvo into the Canadian recreational marketplace and we believe that we are in a strong position to succeed.

InventHelp Inventor Develops Luggage Loading Device for Tour Buses (TRO-317)

Wednesday, August 5, 2020 - 3:30pm

PITTSBURGH, Aug. 5, 2020 /PRNewswire/ --"I'm a tour bus driver and I needed a safer, time-saving way to get all of the passenger luggage on the bus," said an inventor, from Dundalk, Ontario, Canada, "so I invented the ROBOTIC LUGGAGE MOVER."

Key Points: 
  • PITTSBURGH, Aug. 5, 2020 /PRNewswire/ --"I'm a tour bus driver and I needed a safer, time-saving way to get all of the passenger luggage on the bus," said an inventor, from Dundalk, Ontario, Canada, "so I invented the ROBOTIC LUGGAGE MOVER."
  • The patent-pending invention provides a strain-free way to load and unload heavy luggage on a tour bus.
  • In doing so, it eliminates the need for the driver to struggle and strain.
  • "My design could help to spare unwanted fatigue, muscle strain and injuries associated with loading and unloading luggage."

Asante Gold Announces Kubi 3D Model Extends Gold Mineralizing System

Thursday, July 2, 2020 - 2:30pm
Key Points: 
  • Link to 3D model video: http://www.asantegold.com/assets/Video/KubiMag3DSEMS.mp4
    In Ghana, Africas largest gold producer, many big mines are located along north east trending regional shear systems that exceed 250km in length.
  • Studies indicate that the hydrothermal gold mineralizing system that generated the Ashanti Gold belt deposits was gigantic and extended to a least 10km to 15km in depth (Schmidt Mumm et al 1996).
  • Fine refractory gold occurs in arsenopyrite disseminated with pyrrhotite and pyrite, with free milling coarse gold in late quartz veins.
  • At Kubi the gold is free milling and occurs within a 1km long by 1m to 15m thick shear bounded garnet zone.

InventHelp Presents Strain-Free Gardening Tool (DLL-3599)

Friday, February 21, 2020 - 5:15pm

"To lend her a helping hand, I designed a tool that lets her plant seeds without having to bend or strain."

Key Points: 
  • "To lend her a helping hand, I designed a tool that lets her plant seeds without having to bend or strain."
  • The unit provides a quick and easy way to dig holes, drop seeds, and then cover them.
  • The design eliminates the need to bend over or kneel down, which reduces the physical stress and strain of gardening.
  • 18-DLL-3599, InventHelp, 217 Ninth Street, Pittsburgh, PA 15222, or call (412) 288-1300 ext.

$2.4 Billion Automatic Bending Machine (Automatic and Semiautomatic) Market - Global Forecast to 2024

Friday, November 8, 2019 - 2:45pm

The Automatic Bending Machine Market is Expected to Grow from USD 1.9 Billion in 2019 to USD 2.4 Billion by 2024, at a CAGR of 4.5%.

Key Points: 
  • The Automatic Bending Machine Market is Expected to Grow from USD 1.9 Billion in 2019 to USD 2.4 Billion by 2024, at a CAGR of 4.5%.
  • Automatic type bending machines are expected to account for a larger market share than semiautomatic types bending machines from 2019 to 2024.
  • Thus, safe automatic loading and unloading and ease of use drive the market for automatic bending machines.
  • Also, electric bending machines are cheaper than bending machines based on other technologies, which ultimately boosts the demand for electric bending machines.