Drilling

ALLEGIANT to Host Webinar on Thursday, June 3 at 11 a.m.ET (8 a.m. PT) to Discuss Recent Drill Results and Strategy at Eastside

Retrieved on: 
Monday, May 31, 2021
Woodworking, Mechanical engineering, Drilling, Machining, Drill, Hole drilling method, Economic sectors, Articles, Music

ET (8 a.m. PT) to discuss the recent drill results and strategy going forward at Eastside.

Key Points: 
  • ET (8 a.m. PT) to discuss the recent drill results and strategy going forward at Eastside.
  • Some of the highlights of the 9-hole drilling program are as follows:
    Please refer to the following news release for additional information which includes a link to the table of the results.
  • This news release corrects for an error on the intercept table for Hole 245.
  • It should have read including 15.2m of 3.4 g/t, however, the main intercept of 35.1m of 1.6 g/t remains the same.

Pasofino Gold Provides Further Results for the Dugbe F Infill Drilling Program

Retrieved on: 
Monday, May 31, 2021
Oil well, Drilling, Inventions, Economy, Science and technology

Cross section through the southern part of Dugbe F as shown in Figure 1 (Line of Section 1).

Key Points: 
  • Cross section through the southern part of Dugbe F as shown in Figure 1 (Line of Section 1).
  • Cross section through the central part of Dugbe F as shown in Figure 1 (Line of Section 1).
  • Since 21 January 2021 approximately 6,850 meters have been drilled at Dugbe F for the completion of 80 drillholes.
  • The results of the infill drilling to date are encouraging supporting both grade and continuity.

Cerrado Gold Continues to Report Multiple High-Grade Gold Intercepts over Broad Zones of Mineralization from Its Completed Phase I Drill Program at Its Monte do Carmo Gold Project in Brazil

Retrieved on: 
Thursday, May 27, 2021
Woodworking, Physical sciences, Chemistry, holE, Drilling, Drill, Assay, Economic sectors, Orex Exploration

Drill results include 9.5m at 14.6 g/t, 10.2m at 9.3g/t and 24.5M at 2.22g/t Au (All widths true thickness)

Key Points: 
  • The results for the remaining 6 holes of the 55-hole program are expected by June 2, 2021.
  • The reported results provide us with great confidence that our anticipated projections will be met.
  • Including the assays for holes reported today, Cerrado has reported assay results for 49 of 55 holes drilled in the Phase I program.
  • The results indicate that the current drill program has been very successful in confirming and expanding the mineralization.

Superior Drilling Products, Inc. Receives Notice of Continued Noncompliance from NYSE American and Acceptance of Continued Listing Compliance Plan

Retrieved on: 
Wednesday, May 26, 2021
Oil, Gas, Manufacturing, Other Manufacturing, Energy, Engineering, Well drilling, NYSE American, Drilling, Social Democratic Party of India, Economy

SDP has been granted a plan period through May 18, 2022 to regain compliance

Key Points: 
  • SDP has been granted a plan period through May 18, 2022 to regain compliance
    SDPs initial plan for regaining compliance was accepted by the NYSE American on January 28, 2021.
  • SDP subsequently received approval on May 21, 2021 from the NYSE American on its first quarterly update to its plan.
  • The Company will continue to trade under the symbol SDPI on the NYSE American pursuant to this plan period extension.
  • Superior Drilling Products, Inc. is an innovative, cutting-edge drilling tool technology company providing cost saving solutions that drive production efficiencies for the oil and natural gas drilling industry.

Solaris Reports 1,029m of 0.73% CuEq From Surface, Expands Warintza Central to +1,100m Strike; Maiden Drilling Set to Commence at Warintza East

Retrieved on: 
Wednesday, May 26, 2021
Articles, Academic disciplines, Communication, Forward-looking statement, Sampling risk, Reliability engineering, Sampling, Drilling, Core drill

Drill core is cut in half on site and samples are securely transported to ALS Labs in Quito.

Key Points: 
  • Drill core is cut in half on site and samples are securely transported to ALS Labs in Quito.
  • Sample pulps are sent to ALS Labs in Lima, Peru and Vancouver, Canada for analysis.
  • Solaris is not aware of any drilling, sampling, recovery or other factors that could materially affect the accuracy or reliability of the data referred to herein.
  • This document contains certain forward-looking information and forward-looking statements within the meaning of applicable securities legislation (collectively "forward-looking statements").

Benchmark Commences 2021 Project Mobilization to Support 100,000 Metre Drill Program at Its Gold-Silver Project

Retrieved on: 
Wednesday, May 26, 2021
Benchmark, Drilling

Edmonton, Alberta--(Newsfile Corp. - May 26, 2021) - Benchmark Metals Inc. (TSXV: BNCH) (OTCQX: BNCHF) (WKN: A2JM2X) (the "Company" or "Benchmark")- is pleased to announce mobilizing a crew to its Lawyers Gold-Silver Project in preparation for the 2021 work program.

Key Points: 
  • Edmonton, Alberta--(Newsfile Corp. - May 26, 2021) - Benchmark Metals Inc. (TSXV: BNCH) (OTCQX: BNCHF) (WKN: A2JM2X) (the "Company" or "Benchmark")- is pleased to announce mobilizing a crew to its Lawyers Gold-Silver Project in preparation for the 2021 work program.
  • Benchmark is preparing drilling, engineering, geotechnical, environmental baseline studies, regional new targets drilling, and definition drilling to advance its flagship gold-silver project.
  • Benchmark's Lawyers Gold-Silver Project is road accessible and located within the Golden Horseshoe area of north-central British Columbia, Canada.
  • The 2021 drill program will consist of expansion and definition drilling to extend the deposits along-strike and at depth, while moving gold-silver ounces from inferred to indicated and measured categories.

Quadro Intersects 20.37 g/t Au over 0.5 m and 3.89 g/t Au over 2.5 m in Undercut Drill Holes at Staghorn Gold Project in the Central Newfoundland Gold Belt

Retrieved on: 
Tuesday, May 25, 2021
Physical sciences, Chemistry, Atoms, Undercut, Gold, NEWFOUNDLAND AND LABRADOR, Drilling

A total of 1403 meters was completed in ten holes, all targeted on the Marks Pond gold zone.

Key Points: 
  • A total of 1403 meters was completed in ten holes, all targeted on the Marks Pond gold zone.
  • The drilling consisted of a series of 50-meter spaced step-out and undercut holes to the northeast of the discovery hole MP20-02.
  • From T. Barry Coughlan, CEO: "Newfoundland is experiencing a modern gold rush and Quadro is well positioned for discovery.
  • This undercut intersected 3.89 g/t Au over 2.5m within a wider interval of 1.23 g/t Au over 15.0m.

Rio Tinto Intersects 1.78% Copper and 9.25 g/t Silver over 3.1 Metres Within 48 Metre Copper Zone at Forum's Janice Lake Copper/Silver Project, Saskatchewan

Retrieved on: 
Tuesday, May 25, 2021
Rafuse, Surnames, Drilling, Drill, Rio Tinto, Companies, Economic sectors, Economic taxonomy

RTEC plans to continue its drill program beginning in June to follow up on these results on the Rafuse target.

Key Points: 
  • RTEC plans to continue its drill program beginning in June to follow up on these results on the Rafuse target.
  • Rio Tinto plans to continue drilling along the remaining one and half kilometres of strike potential at Rafuse this summer.
  • Thick intervals of copper mineralization have now been intersected by drilling for over 5 kilometres on the property on four different targets."
  • Three drill fences at 200 metre spacings for a total strike length of 650 metres have been tested (Figure 1).

More Bonanza Grade Gold-Silver at Los Reyes as Ongoing Drilling Expands Guadalupe East and Zapote South

Retrieved on: 
Tuesday, May 25, 2021
Drilling, Machining, Woodworking

The results include new drill core assays from the Guadalupe East and Zapote South deposits which are two of eight known gold-silver deposits that comprise the current mineral resource at Los Reyes.

Key Points: 
  • The results include new drill core assays from the Guadalupe East and Zapote South deposits which are two of eight known gold-silver deposits that comprise the current mineral resource at Los Reyes.
  • Twelve drill holes are being reported on, including seven holes from Guadalupe East, and five holes from Zapote South (see Figure 1).
  • An additional four drill holes have also been completed at Guadalupe East, each encountering the Estaca vein, with assays pending.
  • Drilling the bonanza grade mineralization at Guadalupe East requires solving problems caused by historic workings, access logistics and the depth of targeted mineralization from surface.

Environmental Impact Assessment Submitted

Retrieved on: 
Friday, May 21, 2021
Minerals, Articles, Natural environment, Ecotoxicology, Environmental impact assessment, Environmental law, Environmental monitoring, Sustainable design, Technology assessment, Lithium, Drilling, Spodumene

The current programme of work was announced by the Company on 10 August 2020 (Measured Resource Drilling Commenced).

Key Points: 
  • The current programme of work was announced by the Company on 10 August 2020 (Measured Resource Drilling Commenced).
  • Drilling of seventeen of the nineteen holes has been completed and the eighteenth hole is currently underway.
  • This will have the effect of considerably reducing greenhouse gas emissions of the Project when compared to existing spodumene projects.\xe2\x80\x9d\nThe Submission of the EIA to the Czech Ministry of the Environment officially initiates the environmental impact assessment process of the Cinovec project.
  • During this time, the Ministry will assess the submitted documentation, comments of all stakeholders in the proceedings and decide whether it will be necessary for European Metals to prepare additional studies.