Drilling

Callinex Intersects 67m of 2.73% Copper and 20.53m of 2.58% Copper in Step-outs at the Rainbow Deposit in the Flin Flon Mining District, MB

Retrieved on: 
Wednesday, June 30, 2021
Drilling, Machining, Woodworking

PBM-129-W2 is located 60m along strike to the south of PBM-113-W1 and 67m vertically above PBM-129-W1 ( Rainbow Deposit Long Section ).

Key Points: 
  • PBM-129-W2 is located 60m along strike to the south of PBM-113-W1 and 67m vertically above PBM-129-W1 ( Rainbow Deposit Long Section ).
  • Max Porterfield, President and CEO, stated, "The drill results announced today represent the two widest intersections to date at the Rainbow Deposit.
  • Drilling over the summer will continue to focus on building a high-grade copper resource at the Pine Bay Project."
  • Callinex will continue to provide results on an ongoing basis for the duration of the 2021 drilling campaign.

New Found Intercepts 430.2 g/t Au Over 5.25m in New Discovery at Golden Joint Zone, 1km North of Keats

Retrieved on: 
Wednesday, June 30, 2021
Drilling, Machining, Woodworking, Drill, Economic sectors, Articles, Economy

The new Golden Joint discovery occurs in two to three sub parallel vein systems located approximately 1km North of the Keats Zone and 850m South of the Lotto Zone (see Figures 1, 2, and 3).

Key Points: 
  • The new Golden Joint discovery occurs in two to three sub parallel vein systems located approximately 1km North of the Keats Zone and 850m South of the Lotto Zone (see Figures 1, 2, and 3).
  • Results from the parallel Golden Joint HW (hanging wall) zone approximately 150m east of the main Golden Joint Zone also returned several significant intervals often including visible gold mineralization, including 12.7 g/t Au over 2.0m in hole NFGC-21-199 (see Figure 2).
  • Drilling will step out on these intervals to further test the Golden Joint HW Zone.
  • Currently two drills rigs are operating at Golden Joint, focused on stepping out from discovery hole NFGC-21-241.

Mandalay Resources Extends Main Zone and Confirms the Eastern Extension of Lake Zone at Its Björkdal Operation

Retrieved on: 
Tuesday, June 29, 2021
Oil well, Drilling, Mandalay, Science and technology, Inventions, Economy

TORONTO, June 29, 2021 (GLOBE NEWSWIRE) -- Mandalay Resources Corporation ("Mandalay" or the "Company") (TSX: MND, OTCQB: MNDJF) is pleased to provide an update on the Main Zone and Lake Zone drilling programs at its Bjrkdal Operation in Sweden.

Key Points: 
  • TORONTO, June 29, 2021 (GLOBE NEWSWIRE) -- Mandalay Resources Corporation ("Mandalay" or the "Company") (TSX: MND, OTCQB: MNDJF) is pleased to provide an update on the Main Zone and Lake Zone drilling programs at its Bjrkdal Operation in Sweden.
  • Both suggestions of vein extension and upgrading have been supported by extensional drilling started in late 2020 by the Bjrkdal Deeps Drilling campaign and continued through the Lake Zone Infill and the Main Zone Extension drilling programs of 2021.
  • Perspective view of the Bjrkdal Mine looking towards the SSW highlighting the interaction of the veining (Red) marble (Blue) and Bjrkdal shear (Yellow).
  • Drilling of the 2021 Main Zone extension and Lake Zone infill drilling is also shown.

Oroco Receives Approvals for Drill Programs

Retrieved on: 
Wednesday, June 23, 2021
Drilling, Machining, Woodworking, Oil well, Inventions, Science and technology, Economy

The Chihuahua State office of SEMERNAT approved the Companys 46 drill locations, supporting 28-person camp, and access road network the Brasiles Zone.

Key Points: 
  • The Chihuahua State office of SEMERNAT approved the Companys 46 drill locations, supporting 28-person camp, and access road network the Brasiles Zone.
  • The Company will now proceed to install water storage and distribution facilities to support the drilling at the Brasiles and North Zones and will shortly mobilize drill equipment to commence the drill programs.
  • Based on data generated by these drill programs, a historical Prefeasibility Study was completed by Bateman Engineering Inc. in 1994.
  • Oroco does not assume any obligation to update the forward-looking statements should they change, except as required by law.

FenixOro Discovers New, Wider Mineralized Structure and Completes First Hole of Phase 2 Drilling

Retrieved on: 
Wednesday, June 23, 2021
Drilling, Machining, Woodworking, Drill, Oil well, Science and technology, Economy, Economic sectors

Hole P010, the first hole of the Phase 2 infill and step-out drill program on the northwest vein corridor has been completed at a hole length of 540m.

Key Points: 
  • Hole P010, the first hole of the Phase 2 infill and step-out drill program on the northwest vein corridor has been completed at a hole length of 540m.
  • Detailed vein mapping was completed in 76 mines in the area of Phase 1 drilling.
  • Phase 2 drilling has begun and hole P010 has been completed to a length of 540 meters.
  • Hole P011 is being drilled at a steeper angle than earlier holes as a deep test of economic potential of the mineralized system.

Desert Gold Completes over 230 Holes at SMSZ Project Totaling 16,400 Metres - 82% of Planned Program Completed

Retrieved on: 
Tuesday, June 22, 2021
Drilling, Machining, Woodworking, Drill, Economic sectors, Articles, Economy

As of June 20th, the Company has completed over 230 holes comprising 16,400 metres of drilling representing in excess of 82% of the planned 20,000 metre drill program.

Key Points: 
  • As of June 20th, the Company has completed over 230 holes comprising 16,400 metres of drilling representing in excess of 82% of the planned 20,000 metre drill program.
  • The 410 km2 SMSZ Project is both named after and overlies a 38 km section of the Senegal Mali Shear Zone (the "SMSZ").
  • To the Company's knowledge, the SMSZ Project is the largest, contiguous, non-producer land package over this highly prospective structural feature (see Figure 1.).
  • A general summary of the holes completed to date, by target area follows (see Figure 2):
    28 holes totaling 3,641 metres completed with AC, RC and diamond drill holes ranging from 30 to 336 metres long.

Tombill Mines Confirms Extension of the F-Zone onto Its Flagship Property: Intersects 6.23 gpt Gold over 13.3m

Retrieved on: 
Thursday, June 17, 2021
Drilling, Machining, Woodworking

TB21-002 was designed to test the area of structural complexity below the F-Zone rather than targeting the zone itself.

Key Points: 
  • TB21-002 was designed to test the area of structural complexity below the F-Zone rather than targeting the zone itself.
  • TB21-003 was drilled to 891m down-hole, but was abandoned due to technical difficulties before the F-Zone target was reached.
  • TB21-004 was completed at a down-hole depth of 1394m and intersected the bottom tip of the F-Zone in the "fault offset block".
  • This hole also intersected a new zone of mineralization within ultramafic intrusive called the UM Zone returning 5.29 gpt Au over 1.0m.

Roxgold Intercepts 39 G/T Over 8M at New Gabbro North Prospect and Extends Sunbird With 15.1 G/T Over 12M at Séguéla Project

Retrieved on: 
Thursday, June 17, 2021
Natural Resources, Other Natural Resources, Mining, Minerals, Earth's crust, Fault, Stratigraphy, Structural geology, Drilling, Academic disciplines

Located approximately 7km north-east from Antenna (Figure 1), Gabbro North was discovered through regional geochemistry soil and surface mapping.

Key Points: 
  • Located approximately 7km north-east from Antenna (Figure 1), Gabbro North was discovered through regional geochemistry soil and surface mapping.
  • Mineralization remains open along strike and down-dip, with drilling intersecting low-grade or narrow intervals in all the other holes.
  • To the north of Sunbird, detailed logging has identified an interpreted steep north-south striking fault which has offset the northern strike projection.
  • Click here to view the full listing of drill results from the recent drilling programs at the Sgula Gold Project.

i-80 Gold Commences Underground Drilling at its Granite Creek Property - Name Change of the Getchell Property

Retrieved on: 
Wednesday, June 16, 2021
Getchell, Drilling, Granite Creek

RENO, Nev., June 16, 2021 /PRNewswire/ -i-80 GOLD CORP. (TSX: IAU) (OTC: IAUCF)("i-80", or the "Company")is pleased to announce that rehabilitation of underground drill bays is completed and underground drilling has commenced at the Company's Granite Creek ("Granite Creek" or "the Property") property located in Humbolt County, Nevada.

Key Points: 
  • RENO, Nev., June 16, 2021 /PRNewswire/ -i-80 GOLD CORP. (TSX: IAU) (OTC: IAUCF)("i-80", or the "Company")is pleased to announce that rehabilitation of underground drill bays is completed and underground drilling has commenced at the Company's Granite Creek ("Granite Creek" or "the Property") property located in Humbolt County, Nevada.
  • The Company's Getchell Property has been renamed Granite Creek to avoid confusion with the Getchell open pit located at the nearby Turquoise Ridge mine property.
  • The Company has launched its 2021 surface and underground drilling program at Granite Creek that is expected to consist of approximately 22,000 metres of drilling.
  • Underground drilling will be focused on delineating sufficient resources for developing a nearterm development and mining plan.

Ridgeline Minerals Intersects 123.2 g/t Silver over 44.2 Meters and Initiates Phase I Metallurgy Program at the Selena Project, Nevada

Retrieved on: 
Tuesday, June 15, 2021
Chemistry, Physical sciences, Natural sciences, Laboratory techniques, Inductively coupled plasma mass spectrometry, Metallurgical assay, Assay, Drilling, Polyethylene terephthalate

To ensure consistency moving forward, all 2021 drilling has been analyzed with the aforementioned 4-acid digest and ICP-MS analysis.

Key Points: 
  • To ensure consistency moving forward, all 2021 drilling has been analyzed with the aforementioned 4-acid digest and ICP-MS analysis.
  • View updated 4-acid assay composite table for all 2020 Ridgeline drilling HERE .
  • Ten representative bottle roll composites located throughout the mineralized footprint have been submitted to McClelland Laboratories Inc. of Reno Nevada.
  • PAL also undertakes its own internal coarse and pulp duplicate analysis to ensure proper sample preparation and equipment calibration.